120T hydraulic jacking machine 120T hydraulic jacking machine sales outlets

Our main specializing in the production of hydraulic jacking machine, cement pipe jacking machine, a small diamond pipe jacking machine, pipe jacking machine is based on our actual experience to do over the years accumulated line tool developed from, pipe jacking machine made as to exclude the construction side artificial unattainable problem of sewage, crossing, bridge crossing, drain made out of ground-breaking contribution to the gradual improvement through the construction experience, combined with the geological terrain, from the top, pull, drag, extrusion, expansion and other angles starting jacking machine so that each function is further improved. Top of the machine's functions and technology have fire Chunqing, on this basis, the mechanic who still tireless research and development, strive for a higher level. Top of the machine by the host, pumping stations, drill pipe, baffle, slider, combination, respectively, 30 tons, 60 tons, 120 tons, 200 tons, 320 tons, 500 tons and 600 tons of different size of the tonnage , pumping stations Dimensions (m) 2.5X1.6X1.0 jack Dimensions (mm) Φ76-1600 bezel size (m) 1.2X1.2 one: the work of construction and size 1. Host pits should be dug pit work longer 2.85 meters wide and 1.5 meters deep underground facilities according to reaming diameter and availability. 2. The road work across the pit and pit master work must be centered, center of the two working pits must be vertical, to ensure that the host in the work pit Jacking position alignment is not likely to deviate from the target 3. Working pit dug in front after each dig a baffle groove width 15 cm depth of 30 cm requires two: Adjust the host and fixed 1. First, use a tripod or host Crane work smoothly into the pit. 2. The two shutters are placed around the host, iron side against the wall. 3. The horizontal ruler on the cylinder will host leveling 4. fall along with the line Construction work of the host to pit road and straight across from the exit point, and then check whether the level varies, timely adjustment subject to change. 5. The four support plates are in the adjustment buckle silk ball head with a wrench to unscrew the screw fixed host.