ARTU-K32 while collecting 32 active wet contact passive dry contact switch signal

ARTU-K32 four remote unit is Acrel Electric Co., Ltd. self-developed products, which is a distal end of the monitoring and control devices, is responsible for the monitoring and control of field signals, industrial equipment. As a high-performance intelligent power distribution components, widely used in intelligent power distribution, industrial automation, and other fields, it is the best solution for remote automation applications. Products include: remote communication unit, a remote control unit, remote pulse unit, a telemetry unit. Four remote unit known brands Acrel Electric Co. ARTU-K32, ARTU-P32, ARTU-M32, ARTU-J16; Zhuhai send Connaught PMAC3032 like. The following Acrel Electric Co. ARTU-K32 four remote unit products, for example, describes the functions and technical parameters ARTU-K32 four remote units. Acrel ARTU-K32 four remote unit standard JB / T 10388-2002 "intelligent control node products general technical conditions with bus communication function" Standard GB / T 13729-2002 "remote terminal equipment" for the environment Operating temperature: -5 ℃ ~ + 55 ℃ Storage temperature: -25 ℃ ~ + 70 ℃ Relative humidity: ≤95% non-condensing, non-corrosive gases Altitude: ≤2500m Protection: IP20 EMC GB / T 17626.2 anti-static discharge disturbance Test Level 4 GB / T 17626.3 RFEMS test level 3 GB / T 17626.4 electrical fast transient burst immunity test level 4 GB / T 17626.5 shocks (surge) Immunity Test Level 3 GB / T 17626.6 conducted disturbances induced by RF field immunity test level 3 GB / T 17626.12 oscillation immunity test level 3 Product Features Product has a channel status indicator and communication status indicator. Two-way communication interface, set and commissioning, another road all the way to the common parameters for reading and setting the "four remote" value, to ensure communication reliability. Choose the host computer or local DIP switch settings for the product in two ways address and baud rate. Products using the software and hardware "watchdog" technology to prevent freezing. ARTU-M32 also provides 32 input signal indicator, and high and low alarm thresholds can be set via the communication signal input. Technical indicators ARTU-K32 input and input ARTU-P32: The dry / wet contact (pulse) ARTU-M32 input mode: AC / DC0-20mA or AC / DC0-5V auxiliary power DC24V (± 10%), DC100 -350V, AC85-265V insulating strength 2kV / min, 50Hz bus way RS485 interfaces Modbus-RTU protocol standard mounting rail mounting Product Selection TS35mm ARTU-K32 remote communication unit function ARTU-K32 can gather 32 active wet contact or passive dry contact switch signal. With optical isolation technology to achieve electrical isolation of input and output. Data exchange with the host computer via RS485 bus, real-time reflection of the input signal status, and can store a total of 1600 32 sequence of events (SOE information), accurately reflect the switch events. ARTU-K32 as an automatic part of the state feedback control element, it can be used to monitor the execution state of automation equipment or to switch position indicator collection. ARTU-P32 walk away pulse unit pulse unit features optical isolation technology to achieve electrical isolation of inputs and outputs can be active or reactive power pulses of centralized collection and achieve accurate energy measurement, data exchange with the host computer via RS485 bus. With power-down protection, especially for energy automation business management, but also it can be used to count the automation equipment. ARTU-M32 telemetry unit functions telemetry unit with AC sampling achieve 32-way AC / DC0 ~ 20mA, AC / DC0 ~ 5V true RMS (RMS) measurement, data exchange with the host computer via RS485 bus, reflecting the transmitter or telemetry value of the standard signal sensor. The analog transmitter can be current, voltage, temperature, pressure and other output signal is converted to a digital signal, and upload, with 32 color LED lights to indicate each of the four states of input signals (no input signal is normal, high alarm, low alarm), high and low alarm values ??set by communication. ARTU-J16 remote control unit function remote control unit is a remote relay output modules for data exchange with the host computer via RS485 bus system for performing remote control operation, a total of 16 relay outputs, output contacts can be set to pulse (jog ) mode or hold mode, and can store 16 groups totaling 1600 relay chronological record (SOE information). As part of the automatic control of the actuator, it can be used to remotely control automation equipment or direct drive electric operating mechanism of automation equipment, remote or automatic control. ARTU monitoring distributed applications and multi-loop monitoring device is mainly used in intelligent power distribution, industrial automation, machine tools, electronics and other fields. Products include: ARTU-K32 remote communication unit, while collecting 32 digital signals; ARTU-J16 remote control unit to receive computer instruction execution system remote control operation, there are 16 relay outputs; ARTU-P32 remote pulse unit can collect 32 electrical degree pulse signal or pulse signal count; telemetry unit has ARTU-AM32, ARTU-DM32 two specifications. Patents and copyrights ARTU-M32 Patent: Four remote unit means (ARTU) - appearance patent No. 200630195814.1; 32 telemetry signal circuit simulation - Utility Model Patent No. 200820038343.7 ARTU-M32 for the right registration number: 2008SR23337 "Bianco Swiss ARTU-M32 multi-loop measurement and control device software V1.0 "If you want to know more, please contact: Company: Jiangsu An Kerui Electric Manufacturing Co., Ltd. Address: Jiangyin City South Gate Town ASEAN Industrial Park, Jiangsu Province Road on the 5th ASEAN Technical Support : Zhang Qifeng 18860995106 0510-86179963 QQ: 2880263324 Fax: 0510-86179963 Postcode: 214405 E-mail: 2880263324@qq.com Website: http: //www.acrel-et.com/