Smart GL.M motor special power-saving device

R & D background motor is the most widely used electrical equipment, but also the lowest power efficiency of electrical equipment, its power consumption is typically 68% -83% of a country's total industrial electricity, while China also accounted for 70% so, and usually 60 percent of the motors are at 60 percent or less operational load conditions, the case of large horse-drawn cart and low-load operation is quite common, on the other hand because the design must take into account the overload capacity and operational security, general will select the motor power is greater than the required load power, there is a lot of excess energy, plus a lot of the load are subject to change. Huatai Intelligent Motor GOLDWAY high and high and? Power saving through the built-in power-saving optimization dedicated control software dynamically adjust the motor running in the process of voltage and current, without changing the motor speed conditions, ensure that the output torque of the motor and load demand exact match, so as to achieve the purpose of energy saving. The basic principles of intelligent high and Huatai GL.M motor energy-saving equipment with intelligent microprocessor control technology, without manual adjustment, through a closed-loop feedback control system that senses circuit compares the voltage and current waveforms of the motor, as is the inductance circuit, voltage and current waveforms there is a time difference, the lighter the load, the greater the current waveform lagging. The minimum no-load efficiency of the motor, the interval between waveforms greatest. The interval between the microprocessor waveform monitor and adjust accordingly trigger pulse, which can respond faster than the speed of the motor is much faster, it can automatically detect the motor running track load changes, the detection signal back to the control center, After the central processing instruction signal is given after the operational amplifier in order to change the output active power of the motor optimal operation with minimal power consumption. Motors are usually designed on the device is often greater than the use of power, especially for variable load and no-load operation, energy waste is prohibitively high. High and Huatai special power-saving Smart GL.M motor means automatic detection, tracking system can effectively change detection load automatically adjust the active power output: When the motor is idling or light load, automatically reduces the active power output, when in When overloaded, they automatically increase the active power output, to ensure the normal operation of the motor, the need for so many, to achieve "the total that is needed," which maximize energy savings, which is particularly significant in the energy-saving effect fundamental principle. Features? Saving effect is remarkable, saving rate of 15% to 50%? Improve the power factor? Soft start, soft stop, reduce the inrush current? Improve operational performance and reduce operating noise, vibration and heat, extending motor life? optimization features, without changing the motor speed and torque characteristics? intelligent control, once set, automatic tracking, no manual adjustment? comes bypass system, energy saving / mains state free to switch