Snap machinery has been certified Wulanchabu carbonation machines, production of energy carbonation machine

Straw gasification carbonization machine routine repair and maintenance: 1, bearing shoulder the entire load of the machine, so good lubrication of the bearing life of a great relationship, it directly affects the life and the operation rate of the machine, which requires the injection of lubricating oil must be clean, seal must be good, major oiling at the machine (1) Turn bearing (2) roller bearing (3) all gears (4) activities bearings, sliding plane. 2, the newly installed tire prone to loosening must always be Check. 3, note that each part of the machine is working properly. 4, pay attention to check the wear of wear parts, pay attention to replacement of worn parts. Carbonation machine production process, although there are dust soot and other processing equipment, but still have a small amount of wood tar oozing smoke, etc., which contain carbon monoxide and other substances, if long-term inhalation can also cause harm to humans. So, in the whole plant charcoal process, to ensure ventilation, carbon monoxide gas produced in time to disperse. At the same time you need to collect wood tar and wood vinegar, to make appropriate protective measures to prevent the liquid irritate the skin. On the other hand, the operator should be equipped with a dust mask and goggles when handling equipment to strictly follow the correct procedures to operate and do all aspects of security. Immediately after the preparation of biomass carbon and other products, to timely heat, cooling treatment, to prevent the accumulation of spontaneous combustion phenomenon. Carbonized charcoal in the process, pay attention to all aspects of good, but also to ensure the capacity to pay attention to personal safety and protection of the environment through scientific and rational way to reduce risk, and ensure safe production.