Magnetic heat-shrinkable tubing resistance to electromagnetic interference electromagnetic shielding shrinkable tube heat shrinkable tube manufacturer

Magnetic heat-shrinkable tubing resistance to electromagnetic interference electromagnetic shielding shrinkable tube heat shrinkable tube manufacturer. Our main products are: 175 ℃ high temperature heat shrink tubing semi-rigid, transparent flame retardant heat shrinkable tube with plastic double-wall heat shrink tube, 150 ℃ oil thermal control, 200 ℃ Viton heat shrink tubing, heat shrink tubing, heat shrink tubing logo, 200 ℃ heat-shrinkable marker sleeves, 260 ℃ Teflon heat shrink tubing, heat shrinkable tube in the wall , environmental thermal tube, 150 ℃ military standard environmental retardant heat shrinkable tube, magnetic heat shrinkable sleeve, heat shrink tubing neoprene, EPDM EPDM heat shrink tubing, heat-shrinkable tubing brake hose protection, shrinkage heat shrinkable tube, high-pressure busbar thermal control, yellow-green shrinkable tube, hot melt tube, Teflon tube, according to customer requirements non-standard Size and color magnetic heat shrinkable sleeve shrink tube against electromagnetic interference electromagnetic shielding shrink tubing application by the irradiation crosslinked polyolefin made of special magnetic, electromagnetic compatibility, resistance to electromagnetic interference resistance, can greatly improve the electromagnetic performance and stability of electronic components. It can be widely used in electronic components industry, such as inductors, capacitors, inductors played instead of the external magnetic shield, upgrade inductance, electromagnetic compatibility (EMC) and so on; also be used to PC power, capacitors, data lines needed electromagnetic shielding electronic circuitry, an electromagnetic shielding effect. Characteristics shrink ratio 2: 1 excellent electromagnetic compatibility (EMC) and resistance to electromagnetic interference (EMI) and stable performance, simple installation, even in line with the contraction RoHS, REACH environmental standards operating temperature range continuous use temperature: -55 ℃ ~ 125 ℃ lowest Starting shrink temperature: 80 ℃ Minimum fully recovery temperature: 110 ℃ Performance Property Performance Requirements Test Method Typical Value longitudinal shrinkage rate ≤10% ASTM D 2671 ≤5% tensile strength 10.4MPa min ASTM D 638 ≥12MPa elongation at break. Long rate of 200% min. ASTM D 638 ≥400% thermal shock without cracking ASTM D 2671 by Cold bend (-30 ℃, 1 hour) no crack ASTM D 2671 by withstand voltage and breakdown 1500V, 60sec, no breakdown ASTM D 2671 by a volume resistivity of 1012Ω · cm min. before the ASTM D 876 ≥1012Ω · cm corrosive non-corrosive ASTM D 2671 1K ~ 500KHz operating frequency through inductor rise 10% to 25% shrinkage Specifications Dimensions Size (mm) As supplied After As As fully retracted (mm) After recovered Standard Package (m / volume) Standard package (m / roll) the inner diameter of the inner diameter Wall thickness Inside diameter wall thickness (max.) Inside diameter wall thickness Wall thickness Ф3 3.5 ± 0.3 0.25 ± 0.05 1.5 0.45 ± 0.10 200 Ф4 4.5 ± 0.3 0.25 ± 0.05 2.0 0.45 ± 0.10 100 Ф4.5 5.0 ± 0.3 0.25 ± 0.05 2.3 0.50 ± 0.10 100 Ф5 5.5 ± 0.4 0.28 ± 0.06 2.5 0.56 ± 0.10 100 Ф6 6.5 ± 0.4 0.28 ± 0.06 3.0 0.56 ± 0.10 100 Ф7 7.5 ± 0.4 0.28 ± 0.06 3.5 0.56 ± 0.10 100 Ф8 8.5 ± 0.4 0.28 ± 0.06 4.0 0.60 ± 0.10 100 Ф9 9.5 ± 0.4 0.30 ± 0.08 4.5 0.60 ± 0.10 100 Ф10 10.5 ± 0.4 0.30 ± 0.08 5.0 0.60 ± 0.10 100 Ф11 11.5 ± 0.5 0.30 ± 0.08 5.5 0.60 ± 0.10 100 Ф12 12.5 ± 0.5 0.30 ± 0.08 6.0 0.60 ± 0.10 100 Ф13 13.5 ± 0.5 0.35 ± 0.10 6.5 0.65 ± 0.10 100 Ф14 14.5 ± 0.5 0.35 ± 0.10 7.0 0.65 ± 0.10 100 Other colors can be customized Size Color Standard Color: Black