KT PVDF175 ℃ heat shrinkable tube heat shrinkable tube manufacturer

KT PVDF175 ℃ heat shrinkable tube heat shrinkable tube manufacturer. Our main products are: 175 ℃ high temperature heat shrink tubing semi-rigid, transparent flame retardant heat shrinkable tube with plastic double-wall heat shrink tubing, 150 ℃ oil heat shrinkable tube, 200 ℃ Viton heat shrink tubing, heat shrink tubing, heat shrink tubing logo, 200 ℃ heat-shrinkable marker sleeves, 260 ℃ Teflon heat shrink tubing, the wall thermal control, environmental thermal control , 150 ℃ military standard environmentally friendly flame retardant heat shrinkable tube, magnetic heat shrinkable sleeve, heat shrink tubing neoprene, EPDM EPDM heat shrink tubing, heat-shrinkable tubing brake hose protection, thermal shrinkage pipe, high pressure busbar heat shrink tubing, yellow-green shrinkable tube, hot melt tube, Teflon tube, according to customer requirements non-standard Size and color KT (PVDF) 175 ℃ heat shrink tubing application KT (PVDF) 175 ℃ heat shrinkable tube is made of imported polymer (PVDF) for high-performance transparent flame retardant heat shrinkable tube, able to live UL certified to meet military standard, which has a transparent and flame retardant properties, can be at 175 ℃ Long-term use at high temperatures, and abrasion resistance, resistance to most oils and chemicals, widely used in insulation in shipbuilding, aviation, aerospace, electronics, electrical and other welding points, terminals and cables to protect electronic components, resistors capacitors, thermocouple insulation and protection, mechanical or chemical corrosion protection, wire ends like all kinds of metal wire, connecting, and other terminals insulation, protection and enhancement. Features ● shrink ratio 2: 1 ● transparent, good high flame ● toughness, excellent physical properties and chemical resistance can not contain chlorine compounds ● environmentally harmful substances, comply with the European RoHS environmental directive and SONY SS00259 standards of environmental protection requirements . Temperature range ● continuous use temperature: -55 ℃ ~ 175 ℃ ● Minimum initial shrinkage temperature: 140 ℃ ● Minimum fully recovery temperature: 170 ℃ Certification / Compliance UL224 VW-1AMS-DTL-23053/18 performance characteristics Item index requirements Test Method Typical Value Physical Characteristics tensile strength 17.3MPa min. ASTMD638 ≥25MPa elongation at break of 1500% min ASTMD638 ≥300% thermal shock (275 ℃, 4 hours) without crack ASTMD2671 by low temperature flexibility (-55 ℃, 4 小时) No rift ASTMD2671 by thermal aging 158 ℃, 168 hours of aging elongation at 100% min. ASTMD638 ≥100% electrical properties and dielectric breakdown voltage 2500V, 60sec, no breakdown ASTMD2671 by volume resistivity of 1014Ω · cm min . ASTMD876 ≥1014Ω · cm chemistry corrosive non-corrosive ASTMD2671 by flame retardant by Vw-1 UL224 specifications Dimensions (lnch) inner diameter (mm / inch) thickness (mm / inch) Packing (m / volume) before contraction ( min) after shrinkage (max.) after shrinking 3/64 1.2 (0.046) 0.6 (0.023) 0.25 ± 0.05 (0.010 ± 0.002) 1.2 1/16 1.6 (0.063) 0.8 (0.031) 0.25 ± 0.05 (0.010 ± 0.002) 1.2 3/32 2.4 (0.093) 1.2 (0.046) 0.25 ± 0.05 (0.010 ± 0.002) 1.2 1/8 3.2 (0.125) 1.6 (0.063) 0.25 ± 0.05 (0.010 ± 0.002) 1.2 3/16 4.8 (0.187) 2.4 (0.093 ) 0.25 ± 0.05 (0.010 ± 0.002) 1.2 1/4 6.4 (0.250) 3.2 (0.125) 0.30 ± 0.08 (0.012 ± 0.003) 1.2 3/8 9.5 (0.375) 4.8 (0.187) 0.30 ± 0.08 (0.012 ± 0.003) 1.2 1/2 12.7 (0.500) 6.4 (0.250) 0.30 ± 0.08 (0.012 ± 0.003) 1.2 3/4 19.1 (0.750) 9.5 (0.375) 0.43 ± 0.08 (0.017 ± 0.003) 1.2 1 25.4 (1.000) 12.7 (0.500) 0.48 ± 0.08 (0.019 ± 0.003) 1.2 11/2 38.1 (15.00) 19.0 (0.750) 0.51 ± 0.08 (0.020 ± 0.003) 1.2 2 50.8 (2.000) 25.4 (1.000) 0.58 ± 0.08 (0.023 ± 0.003) 1.2 Other sizes can be set transparent color system other colors can be customized