Glue bags

A valve bag Our glue Description: Product main ingredients of a vinyl monomer and propylene-based copolymer, the product is used for bonding PP or PE and paper composite type valve bag, with the same type, good gluing not drawing, strong bond, the same yellow, small taste, long shelf life, stable quality, non-flammable, non-toxic in line with SGS standards! Second, our valve bag glue Model: 808A mortar properties: ??? View - yellow emulsion viscosity ??? degree --8000 to 15000Mpa pH --5 to 7-month shelf life --9 diluent - Water dry nature: outside ??? View - yellow latex softness - high residual odor - a small three valve bag glue uses: ??? 808A is environmentally friendly water-soluble binder, in line with international environmental standards, not toxic quality and free of hazards depleting substances. PP or PE is bonded to other materials, special adhesive compound valve bag. Our four valve pockets glue application: ??? exposure time of less than three minutes later put the product coating. For manual and mechanized construction. Adhesive material (to keep glue in a wet state) should be properly maintained after pressed (usually 30 to 60 minutes) and then air, the longer stick better. Five valve pocket glue Note:. ??? 808A may be used in combination with other mortar. Stir before using colloid, take rubber coated tool to use (hair brush, brush, scraper, etc.) as soon as possible with water immersion. This product should be stored in a covered plastic container. After long-term storage will still produce a slight stratification, it is a normal phenomenon. NOTE: We are at your design and development of special products you need to provide you with the quality and price level green binder, ensures perfect your use, as well as your timely address possible use of the product? technical problems.