Anthracite pellet binder

Briquette binder is an important part of the coal produced by the company are widely used throughout the country binder coal coal quality, the so-called formula is no panacea, but with the change of coal composition adjust the recipe is not static, it needs to improve with than the process. Our technical department after repeated practice, now developed a briquette binder can be used for anthracite, bituminous coal, and a series of pulverized toner. The company briquette adhesive products are made of an organic polymer is dedicated to the production of powdered coal organic binder, the product features, high strength, easy to use, to overcome the existing binder modeling low calorific value coal gas production rate at the end, difficult to operate and inconvenience and other defects, non-toxic, odorless, very good adhesion and low cost. Except for the production of coal, but also for coke, charcoal, pellets and various metallurgical slag pellets. First, the product index: Item Index adhesive properties of cold strength: ball / month ≥85kg, thermal stability: 1360 Water ≤10 PH value (1% solution) 6-8 Fineness (60 mesh) ≥60 Ash (dry base count) ≤0.4 Second, use briquettes / ore / coal rods recommended dosage 1-2%, carbon black ball / carbon rods recommended dosage 1.5-2.0%. Different kinds of coal of different dosage needs to be tested in accordance with scientific criteria to determine the exact dosage ratio. Production of coal moisture control is essential. General control before entering the extruder 13 to 14% total moisture, so leaving the extruder out of water is 1% to 2%, dry naturally in the air for 4-8 hours after the water can be reduced from 9 to 10%. Third, costing coal use to build low-adhesive Jie cost-effective, the cost of production of 1 ton of coal varies in 30-50,50-80,60-100 yuan. Fourth, packaging and storage Packing: woven bag lined with plastic film bag, net weight 25kg. Storage: One year.