Dalian glue wood glue industrial gelatin supply

Product Supply: industrial gelatin, glue, boxes with plastic jelly ★ this product use: old carpenter wood plank stick special glue, industrial gelatin Other Uses: Widely used in metal smelting, white, copy offset, adhesive, rain pulp, matches transfer agents, wood glue and other industrial materials; silk, cotton yarn, cotton cloth, straw and other textile industry sizing; coated paper, glossy paper and paper industry polishing; polishing, grinding; gift box line adhesive-mail: 570647353 @ qq. com offerings bone glue This product is the main raw material, after crushing, oil extraction, scrub and other multi-channel process, at a predetermined pressure and temperature extracted from the rubber physical properties of the prion ★: This product is a bone of sacrifice The main raw material, after crushing, oil extraction, scrub and other multi-channel process, extracted from the gel protein at a pressure and temperature requirements. The product is golden, translucent microstrip luster, easy to absorb water, hard amorphous state bead-like particles. ★ technical standard: QB / T1996-94 technical indicators moisture% ≥16; viscosity mpa.s≥5.0-4.0; jelly strength ≥190; ash ≥3; chlorine content of ≥0.6; PH value ≥5-7 ;. ★ Usage: When using glue, first with a volume of water equal to or slightly more than the glue soaked, water-cement ratio of 1: 1.5 is the best time to soak twenty minutes, so that particles after swelling change soft, then heated to about 80 ℃ (according to room temperature and appropriate changes, 85 degrees in winter, summer 75 degrees left and right) to become glue can be used. The ratio of glue and water should be in accordance with the desired viscosity, such as found along with a small amount of water, one should not add too much when concentrated, step by step slowly added, glue trace precipitation in use, side by side so add water as necessary stirring to adjust viscosity and fluidity. Hot bath method must be used hot glue. When using glue coating faster, even, not a dip caused by excessive plastic layer uneven penetration leakage associated sticky glue and other issues.