PP rubber glue stick, glue stick PP with green, sticky rubber strip with glue

PP sticky rubber glue stick PP environmentally-friendly glue, rubber adhesive glue used Jinghong PP (polypropylene) glue H-1202 [Description] Jinghong H-1202 polypropylene (PP) plastic glue, it is designed for PP (polypropylene) plastic bonding and research and development, special fast binder, in line with international environmental standards, through the EU ROHS standards and SGS testing. High performance, high strength, good flexibility, moisture resistance and good characteristics. Easy to operate, can operate manually or dispenser for continuous production line operations. [Application] is dedicated to the adhesive PP (polypropylene) material, suitable for PP and PE, ABS, PS, PC, PMMA, PA, rubber, silicone, metal, stone, ceramics, foam material, wood and other materials bonding. [Project and Parameters Appearance: clear colorless liquid temperature range (℃): - 50 ~ + 80 fluid viscosity: 60-65 Tensile strength (kg / cm2): ≥195 ± 5 shear strength (Mpa): ≥32 Curing speed (in seconds): PP materials and metal bonding, about 20 seconds positioning. PP and PP or other bonding material positioning time is about 10 seconds. [Operation] 1. Use a dry cotton cloth or sandpaper would then face dust, oil, etc. is removed, then the solvent or special detergent, in order to ensure the sticky surface to be cleaned. 2. Unscrew the H-1205PP treatment agent (bottle comes with a brush), even in the PP to be sticky surface brush again, wait about 10 seconds, the treatment agent to evaporate (the treated material, to be stuck in 60 minutes then completed); and then point the right amount of H-1202PP special glue (small area bonding, can put the needle or dropper to control the amount of glue), can fit. 3, product after bonding glue curing time ranging from a few seconds to a few minutes. About 30 minutes to reach practical strength, ultra-high strength is obtained after 24 hours. [Note] Do not Wear knit glove comes into contact with the eye, do not rub their hands, rinse with plenty of water, serious and urgent hospital treatment; When skin contact wash with warm soapy water, or use Jinghong special glue solution removed. Please a lot of use in the workplace should be ventilated. [Storage and Shelf life Jinghong H-1202PP (polypropylene) special glue, should be stored in a ventilated, cool, dry place sealed; a prolonged period, can be placed in the refrigerator (use again, took 12 hours in advance, place to room temperature before use). The shelf life of eight months, expired qualified by the trial can continue to use; Packing: 20ML / support, 1000ML / support.