PVC sticky sponge rubber, not unglued glue, waterproof glue, glue factory

PVC sticky sponge rubber, not unglued glue, waterproof glue, glue factory Jinghong Poly EPS foam glue H-1517 [Description] Jinghong H-1517 Poly (EPS) foam glue, based on acrylates, vinyl acetate polymer EPS synthetic polymer as the main special adhesive suitable for bonding polystyrene (EPS, Poly) foam, sponge, wood, cloth, cement, metal, plastic and other materials, a wide range of application, high performance Environmental fast curing adhesive, mainly for EPS and EPS foam adhesive, non-corrosive (burn) EPS foam. The adhesive has good tack, one-component, room temperature fast curing, good water resistance, adhesion resistance, nontoxic, high transparency and so on. [Performance] Project Items Parameters Color Transparent volatile Viscosity (cps) 3500 ± 200 initial positioning time (min) 5-8 initial curing time (min) 10-15 Full cure time (hours) 24 Tensile strength (MPa ) ≥35 ± 2 Peel strength (N / cm) ≥45 ± 3 Solid content (%) 55 ± 5 medium weak acid resistant, resistant to chlorinated aromatic hydrocarbon solvents shear strength (MPa) ≥8 ± 2 operating temperature ( ℃) -50 ~ + 120 Usage 1, will be pasted surface treatment to clean, dry and free of oil. 2, the portion to be bonded evenly coated with a layer of glue, then dry for 2-5 minutes, until the surface tack is appropriate. 3, the dry material is set after the alignment of the bonding, the best pressure conditions. 4. 12-24 hours to reach optimum strength. [Note] 1, Jinghong special glue is flammable, please stay away from fire, heat, store in a cool dry place. 2, glue after opening, please sealed after stored in a cool dry place. 【Storage and packaging】 1, stored at room temperature 12 months, more than holding period, if the glue is not cured, can continue to use after opening, without affecting the quality. 2,1KG / barrel .4KG / barrel .15KG / barrel