PC sticky silicone rubber, silicone adhesive acrylic, silicone high temperature glue stick steel

PC sticky silicone rubber, silicone adhesive acrylic, silicone adhesive glue Jinghong steel high temperature silicone glue H-1508 [Description] Jinghong H-1508 is a silicone rubber silicone glue for a class of silicone and plastic, sponge, foam, metals, ceramics, glass, stone, plastic resin, wood and other materials bonding adhesive, relying on contact with water molecules or adhesive or air in the water molecule and the surface of the cured seal. Product Features Jinghong After H-1508 silicone glue curing elastic and waterproof, moisture, oil, anti-aging, anti-vibration, high temperature (-50 to 260 degrees), insulation and other features! After overcoming the traditional silicone and silicone adhesive brittle, white, heavy odor and other shortcomings, the glue transparent, non-toxic, tasteless, non-irritating! Compliance with international environmental standards, through the EU ROHS standards and SGS testing. [Application] Jinghong H-1508 Silicone glue is mainly used for silicone, plastic (such as ABS, PS, PC, PMMA, PPA, etc.), sponge, foam, metal (such as copper, aluminum, iron, etc.), stone, adhesive material between the glass, wood, ceramics, etc. [Operation] to clean the surface to be bonded, glue (mainly rely on air act trace moisture curing, 15-30 minutes positioning, using the best after 24 hours. (With a humidifier can accelerate the curing time) [Storage Term] stored in a cool dry place at room temperature maintained for a period of eight months. [Package] 100ML / branch (aluminum), 330ML / branch (plastic tube) Jinghong special superglue H-1203, is designed for difficult to stick material (such as polyolefin plastics, antistatic plastic, plastic, silicone, rubber, TPE, PET and other materials) between the adhesive and quickly developed special adhesive, nontoxic, high strength, good flexibility, good moisture resistance , and so is simple to operate, the operation can be manual or dispenser for continuous production line operations. [Application] applies to PP, PE, silicone, anti-static plastic, rubber, TPE, PET, ABS, PS, PC, PMMA, PA, metal, crystal, stone, ceramics, wood and other materials and bonding [Project Parameters Appearance: clear colorless liquid temperature range (℃): -. 50 ~ + 120 fluid viscosity: 120 Tensile strength (kg / cm2): ≥195 ± 2 shear strength (Mpa): ≥35 Curing speed (in seconds): Polyolefin materials and metal bonding, about 20 seconds positioning silicone, rubber and other materials bonding time is about 5 to about positioning. 10 seconds. [Operation] 1. Use a dry cotton cloth or sandpaper to remove oil and other surface then. For different materials, [difficult to bond materials available H-1205 pre-treatment unscrew H-1205PP treatment agent (bottle comes with a brush ), even in the PP to be sticky surface brush again, wait about 10 seconds, the treatment agent to evaporate (the treated material to be bonded is completed within 60 minutes);] and then point the right amount of H-1202PP special glue (very small area bonding, can put the needle or dropper to control glue), can fit 2, after bonding products, glue curing time ranging from a few seconds to a few minutes to about 30 minutes to reach practical strength, ultra-high strength is obtained after 24 hours.