Practical dispenser dispenser dispenser Xin of brand

T-700 Precision Micro Dispensing Technical parameters: Power: AC 220V ± 10% 50 / 60Hz; Power: 8VA pressure source: MAX9.5kg / cm2 (0.94MPa) dry compressed air; pressure adjustment range: 0.2 to 7.0 kg / cm2 (0.02 ~ 0.69MPa); gumming time adjustment range: can be adjusted according to the actual needs is divided into four periods: 0.01 ~ 1sec (for precision micro-dispensing); 0.01 ~ 4sec (for ordinary small plastic volume dispensing); 0.01 ~ 10sec (for ordinary glue or thick high places); 0.01 ~ 30sec (for the large amount of glue or sticky high places); operation mode: time spit glue, glue continuous discharge; Coating starting signal: The foot switch and other passive normally open (NO) contact input (contact capacity DC5V20mA) (internal switch selection switch can be DC5V, DC12V, DC24V applied voltage input conversion), the input signal from the lock; Tu plastic end signal: The relay is normally open (NO) contact output, capacity AC250V3A, DC30V3A; vacuum function: includes vacuum generator; temperature range: + 0 ℃ ~ + 45 ℃; Dimensions (mm): 200 (W ) x122 (D) x75 (H); Weight: 2.5kg; Accessories: footswitch. T-770 Micro dispenser mounted adjustable negative pressure generating device, according to different viscosity glue and adjusted back to the suction generated within the syringe glue, to ensure the dispensing needle at the end of timely income and prevent gum glue spills; external knob adjustment, easy to operate and simple. Pressure adjustment range: 0.2 ~ 7.0kg / cm2 (0.02 ~ 0.69MPa); gumming time adjustment range: can be adjusted according to the actual needs is divided into four periods: