Stickers oily glue silk screen

A range of applications: screen printing glue widely used in metal nameplates, plastic signs (such as ABS, PVC, PS, PC, PP, PE, PET, PMMA, etc.), all kinds of transparent window control panel: DVD, stereo equipment, telephone fax machines, game consoles, mobile phones, watches, remote controls, calculators, LCD monitors and other control panels, as well as various types of circuit boards or software circuit boards, touch membrane switch, trademark viscosity adhesive labels, card industry etc. silk gum. Second, the performance characteristics: ① excellent peel strength, initial tack and holding tack of balance, cohesion and strong; ② of plastic, metal and other materials have excellent adhesion; ③ low surface tension, in a conventional plastic material and printing ink wetting, good leveling; ④ printing process is not blistering, no shrinkage, can not afford not drawing glue, easy to plug network; ⑤ has excellent resistance to aging and stability, resistance to high temperature (- 40 ℃ ~ 130 ℃); ⑥ non-corrosive ink, plastic, metal surface. Third, the use of methods: ① selection of mesh: usually 60-120 mesh screen or stainless steel mesh, For exceptionally strong adhesion good flatness, please use the bottom mesh screen printing such as (24T60 mesh -32T80) If the right amount at the halftone plate photosensitive paste coating will thicken, you can ensure a thicker coat of glue and good adhesion. ② oily screen printing glue, glue, stir slowly over 30 minutes ahead of time to avoid air bubbles, if bubbles can be dropped into the right amount of oil defoamers (1% of the total, may not exceed 5%) ③ course stoppered net or drawing phenomenon, can add a little thinner. ④ drying time after printing and coating of thickness with the outside temperature, room temperature for 30-45 minutes to dry naturally or use a temperature of 50-70 ℃ bake for about 10 minutes before putting in standby mode until the release paper is not completely dry. Fourth, Note: ① be cleaned with water after the printed plastic stencils, hard water or dry cleaning solvent can be used when washing dirty wash water network clean; ② ② This product is a volatile liquid, should stay away from fire and heat, to avoid direct sunlight; ③ use immediately after sealed, stored in a cool dry place; ④ to keep operating under ventilation when using, if the adhesive gets into the eyes, rinse immediately with plenty of water, ask your doctor for treatment when necessary; ⑤ the product industrial and product, please avoid eating, place less of reach of children places.