Geomembrane price

Prices Geomembrane Geomembrane main functions: 1, set the action in one of the seepage and drainage, along with isolation and reinforcement functions. 2, high composite strength, high peel strength, high puncture strength. 3, drainage capacity, friction coefficient, linear expansion coefficient. 4, anti-aging performance, and adapt to the environment temperature range, quality and stability. Geomembrane engineering applications: warp waterproof geotextile composite reinforced with superior impermeability, durability, protective. It can be widely used in railway, highway, sports hall, dams, hydraulic construction, tunnel in a coastal beach, land reclamation and environmental protection projects. Geomembrane characteristics: Width 6 meters, is currently the most wide-composite film high resistance to puncture strength, friction coefficient good aging resistance, to adapt to the ambient temperature range suitable for drainage properties excellent resistance to water, chemicals, construction, transportation, subway, tunnels, waste disposal sites and other projects. Geomembrane laying: 1. laying qualified acceptance by civil respective documents before the geomembrane. 2. Before geomembrane crop, should accurately measure its relevant dimensions, and then press the actual crop, generally should not be cut according to the icon size, should by piece number, a detailed record of the special form. 3. laying geomembrane should be sought to weld at least, under the premise of guaranteeing quality, try to save raw materials. But also easy to ensure quality. The seams between the membrane and the membrane overlap width is generally not less than 10cm, usually arranged in a direction parallel to the weld maximum gradient, that are arranged in the direction of the gradient. 5. Usually in the corner and deformity lots, should be to minimize the short length of the seam. In addition to special requirements, the slope is greater than 1: 6 slopes in the slope from the top or the stress concentration range of 1.5 meters, as far as possible with no welds. 6. geomembrane laying, they should avoid artificially folds, at lower temperatures, should be taut, paved. 7. After the completion of the laying geomembrane, should minimize the membrane surface walking, moving tools, who can cause harm to the impermeable membrane objects should not be placed on the film or the film carry walking, so as not to film accidental damage.