Supplying Universal K11 waterproof coating, waterproof slurry

Introduction k11 waterproof coating. There emulsion blends unique, very active polymer powder and synthetic rubber, synthetic benzene enoyl etc. composed added to the base material and the amount of chemical additives and fillers, the mastication, mixing, rolling, etc. processes from the polymer waterproof material, made of imported materials and domestic high-quality materials, according to the national industry standard instructions to generate the highest level of quality products, the Ministry of Construction as a national focus on promoting products. Features 1, the slurry of active ingredients can penetrate into the pores of the cement-based surface micro cracks and produce a chemical reaction, and penetration in the end internal crystalline material, forming a dense waterproof layer; 2, to cover the hair-like cracks (less than 0.4 mm), and a slight concussion against; 3, in the wet base surface construction, without the need for a protective layer of mortar, tile, etc. can be directly attached to a subsequent step; 4, deep in the end crystal material pores, impermeability compression high strength, having a negative surface waterproof function; 6, non-toxic, harmless, can be directly used for drinking water pools and ponds; coating with depressive effect of the growth of mold, moisture can prevent salt contamination of the finishes. Packaging and storage avoid direct sunlight, should be stored off the ground on the floor to prevent rain soaked, to avoid excessive lamination. 1 ,, precast concrete, cement and plaster bottom, brick, light brick structure; 2, floor wall floor, bathroom, kitchen, planters; edible pools, ponds, sewage treatment pond 3, basements, subway stations, tunnels, civil air defense projects, mines, building foundation; 4, applied to the stone paving, tiles, wood flooring, wallpaper, gypsum board as a pre-layer substrates before processing can be achieved to prevent moisture and salt contamination effects.