Aksu tiles adhesives supplier of good quality

Tiles adhesives Product Introduction This product is a polymer-modified cement based ceramic tiles special binder. Its technical characteristics without dip brick, quick construction; thin-layer construction, reduce weight; adhesive power, easy hollowing; non-toxic environmental protection, weather resistance, water resistance. Suitable for indoor and outdoor use of concrete, plaster base surface, the adhesive surface of ordinary brick tiles, ceramics, mosaics and small natural stone. Specifications Test item Test results Technical indicators present concluding original tensile adhesive strength, tensile adhesion strength Mpa 0.7 ≥0.5 qualified after flooding, the tensile adhesive strength Mpa 0.7 ≥0.5 qualified after thermal aging, Mpa 0.6 ≥ 0.5 tensile strength of collagen freeze-thaw cycles of qualified, Mpa 0.6 ≥0.5 qualified open time, 20min adhesive tensile strength, Mpa 0.5 ≥0.5 qualified construction technology base to deal with all the base surface should be solid, dry, clean and not shaking , no oil, wax stains, concrete curing agents and other loose material. The paint surface should be rough substrate, exposed at least 80% of the original substrate. The new concrete surface should be cured a minimum of 28 days before paving. New plaster base surface should be cured a minimum of seven days before paving. Old concrete or plaster base surface can use industrial detergents or degreasing cleaner, then rinse with water cannons. Before the paving surface is dry after 24h. Remove the concrete surface residue, especially on sloping concrete slab the remaining release agent. The water absorption of the substrate or at high temperatures, dry conditions, before construction must first wet the base surface.