Factory direct rolling crystallite ceramic plate cast stone 200200 / 15mm

Rolling microcrystalline product, which is based on a variety of slag as the main raw material, melting, calendering, crystallization, annealing made of a high strength, high wear and corrosion resistance of new high-tech industrial protective materials and building decorative sheet . Ceramic plate rolling Main Features 1. High wear wool board mainly composed of microcrystalline silica, alumina, zirconia, magnesia, iron oxide, etc., with excellent wear resistance, which can be as low as 0.03 degree of wear g / cm2, it is three times the normal cast stone (0.09g / cm2), manganese 7-8 times, 15-20 times the cast iron. 2. The corrosion-resistant ceramics wool board corrosion resistance superior to acid brick, marble, granite, ordinary cast stone. Both acid and alkali, especially at pH environment may also be used alternately. 3. Impact Impact Resistance microcrystalline wool board up 5.5KJ / M2, three times the normal cast stone (1.57KJ / M2), far to meet the needs of most parts of the material transport. The low friction coefficient of friction coefficient of only 0.05, the use of surface more smooth, not expansion compartment, not hanging material. 5. The thin and light hair crystal plate thickness from 8 to 20mm, in most cases using only about 14mm thickness to meet the actual needs, the actual proportion of only 2.72, is only 1/3 of steel, it is possible to increase the relative positions bodies internal volume, reduce weight equipment and warehouse body. 6. Can be cut on site. 7. optimization index and technical parameters: rolling ceramic plate test item number 1 Impact toughness test value 3.2KJ / m2 2 thermal shock resistance heating 175 ℃ for 1 hour, placed in the indoor environment of 16 ℃ for 40 minutes, no crack generation 3 bending compressive strength 65.2MPa 4 601.2MPa 5 the amount of wear 0.05g / cm2 6 98% sulfuric acid and 99.2%, 98.4% and 20% sulfuric acid of 20% sodium hydroxide 7 98.5% Executive Standard: Q / HWY01-2004 reference Standard: part of the physical properties of the thermal conductivity properties Unit Index (20C) JC514.1-93 ceramic plate of W / mc 1.05 coefficient of thermal expansion (20-300C) 10-7 / ℃ 70-80 ℃ temperature coefficient of friction of not more than 0.05 350 Contact: GUO Xiu Fan Yong 18,239,167,111 15,978,778,187 18,839,118,777 Yuan Yuxia