PET ordinary ink

First, the product description 1, can use the material: Each treated PET sheet and PET material injection molded parts. 2, the ink characteristics: slow dry, plain, good hiding power, bright colors, resistance to punching (stamping embossed). 3. Other parameters: A. over the net: 77T-180T; B. dry time: 15 minutes -25 minutes; rigorous testing time: 24 hours after drying; baking: 60 ℃ -75 ℃ one hour; C. 99% ethanol, 50 times back and forth with 500g, 500g force rub back and forth 50 times. 4, thinner selection: S-3 slow drying thinner, S-3A drying thinner 5 Note: A, the substrate surface should be clean. Before using, stir, add about 10% diluent; B, multi-color overprint on front color table should be dry for 20 minutes, then the next color overprint; 5-10 minutes after the printed thermal drying is better; C, must not be mixed with other inks, so as not to reduce quality of printing inks; add 5% -10% of the DB-01 curing agent when necessary; D, due to materials, processes, injection molding conditions, different environment and other factors that may affect quality, so the use of bulk before the first trial, meet the quality requirements before batch printing; E, the ink must be completely dry before packaging; F, exhausted, ink should be packaged well, away from the fire source, ventilation moisture stored. Shelf life is one year. 6, emergency measures: A, such as dip splashed eye wash immediately with water, serious medical treatment; B, fire fighting and emergency measures: Use dry powder, foam or sand fire; they must wear masks and gloves C, operator operates.