690 multifunction ink

690 Series Introduction 1. Application materials: for all kinds of ABS, acrylic, PC hard rubber products such as injection molding or metal plated surface printing, printing characters. 2, the ink characteristics: belonging to two liquid-based inks, leveling good, moderate luster, screen printing, pad printing. 3. Other parameters: A. over the net performance: 77-120T; B Surface drying time: natural volatile 5-10 minutes; rigorous testing time: Baking plastic 70-80 ℃ 30 minutes, the metal plating 120-150 ℃ baking 20 minutes; C resistant to alcohol: 99% ethanol 500g force back and forth 200 times, wear: 500g force ordinary rubber back and forth 220 times. 4, thinner choice: A, Thinner: silk screen with S-3 special slow thinner; S-3A diluent B printing with dry, wash water network: S-718 5, and the amount of curing agent: DB Add 10% of the total amount of ink -03. 6 Note: A, the substrate surface should be clean. Stir well before use, plus about 10% diluent; B, shall not be mixed with other ink, so as not to reduce quality of printing inks; when stencil plug network, can be washed in water cleaning; C, takes multi-color overlay, and so should color printed on the front surface dry for 20 minutes, then the next color overprint; certain until the ink is completely dry before packaging; D, due to materials, processes, injection molding conditions, different environment may affect the quality, and therefore the first trial before mass use, meet the quality requirements before batch printing; E, the ink must be completely dry before packaging; F, exhausted, ink should be a good package, according to climate change, please stay away from the fire source, stored. Shelf life is one year. 7, emergency measures: A, such as dip splashed eye wash immediately with water, serious medical treatment; B, fire fighting and emergency measures: Use dry powder, foam or sand fire; they must wear masks and gloves C, operator operates.