Meizhou Meizhou silk screen printing ink company specializes in ink screen printing ink factory in Meizhou

Meizhou Meizhou silk screen printing ink company specializes in ink screen printing ink factory in Meizhou Meizhou Meizhou company specializing in silk screen printing ink screen printing ink screen printing ink factory in Meizhou Application: for all kinds of EVA material and rubber material Second, the composition: using advanced resin, special pigments and special additives and other refined three characteristics: 1, 2 good adhesion, good flexibility Fourth, use of the environment: Closed dust, temperature 20 ~ 30 ℃, humidity <85% ideal application effect. Fifth, technical parameters [Appearance]: Various color viscous liquid viscosity []: 35000 ~ 50000mpa.s / 25 ℃ [gravity]: 0.95 + 0.02KG / L [Gloss]: the number may be [resistance movement]: do not migrate [bleeding resistance]: not bleed [discoloration resistance]: do not change color [thinner]: EVA dedicated open water [ratio]: 100: 20-40 [Packing]: 5kg / barrel 【Shelf life : One year six, the construction process 1, material treatment: treatment agent substrate surface dry with EVA 5 ~ 8 minutes 2, printing: the EVA and EVA special ink open water to 100: dilute 20 to 40, full Stir printing, drying at room temperature at 25-30 ℃ were trapping 15-25 minutes later, the scene can be adjusted according to the temperature interval between color printing, but must be fully printed ink is dry, and then the next printing. 3, Packaging: dry after printing is complete from more than 12H, the ink is completely dry before packaging and shipment of seven tests without exception, the storage method, put in ventilated, dry place 2, put on couch plate stack shall not exceed 4 barrel, not upside down 3, fire, lighter, electronic communications equipment can not be brought into the storage area 4, a detailed safety instructions refer to "Material Safety Data Sheet" Eight, Attention: 1, humidity greater than 85%, or rainy days construction, please add the appropriate amount of cyclohexanone or 2 783 special slow dry solvent, is coated on the surface grease, dust, cleaned, moisture drying 3. Avoid different products mix, so as not to affect the adhesion and other physical properties of 4, to avoid Other customer's product mix, so as not to affect the adhesion or migration occurs, discoloration and other abnormal bleeding or 5, when the material is changed, please notify our testing or testing 6, be sure to tightly after opening, to avoid solvent evaporation or absorb moisture in the air, so as not to affect the adhesion or chromatic aberration 7. For high temperature pressing, please add 4% to 5% heat-agent