Supply of the metal, alloy, stainless steel, glass, ceramic surface printing printing / silk ..

Supply of the metal, alloy, stainless steel, glass, ceramic surface printing printing / screen printing ink metal ink Carpoly ink CC-33 series is inconvenient or not available under the baking hot conditions require special decorative or protective surface request their trees and the development of high-grade, high-performance two-component ink cured film with good adhesion, high resistance to physical and chemical resistance, and also has a high surface hardness and wear resistance. CC-33 series metallic ink Features: This series is certain to be equipped by the main agent and hardener to cure this use of two-component reactive ink, which can be natural drying, heat drying may be appropriate reaction, after curing the coating has good adhesion, resistant to stamping, bending, and good chemical resistance. CC-33 Series Stainless Steel Ink Scope: all kinds of metal, alloy, stainless steel, glass, ceramics, thermosetting plastics, electroplating coatings, such as the production of a variety of hardening coatings industry signs, panels, tiles and so on. Surface. CC-33 series stainless steel metal ink screen printing ink attention to the problem: a. This series of ink must be used with a certain proportion of the curing agent to reactive deposition, when the ratio is slightly different in different colors: white system when the main agent / hardener = 10 / 0.8, while the other color main agent / hardener = 10 / 1; b. When using this ink series, press the main agent / curing agent ratio of preparation, and add diluents to adjust to printing viscosity. c. The curing time required different drying methods are quite different, which demonstrated the film properties there are certain differences, please establish the best way according to their actual conditions. d. Multi-color overprint, initially only the bottom and the middle layer is dry to the next printing color, the last color printed finished, heat cure advice. e. After mixing at 25 ℃ hardener ink can be used time 6Hr, more than this time limit, the quality will be affected, the amount of each batch formulated recommendations within six hours spent prevail. Note: the above the resistance test result data of the company under the experimental conditions tested, not as guaranteed. The service center offers long-term supply of the following Garbo ink: PVC light ink CC-11 series of fine printing inks ABS CC-19 series of high-covered plastic ink CC-23 series would not lose face PS inks CC-26 series metal glass ink CC-33 Glass metallic inks CC-34Y series of high-grade PET CC-50 series ink coating surface printing inks CC-59 series plastic halogen-free ink CC-83 series Garbo four colors of ink phone cover glass lenses ink CC-72S series of metallic inks Quality Assurance: The third-party testing authority, Carpoly ink has passed the EU RoHS, the European EN-71 PART3,6P, American ASTM-F963-07, EU REACH series of testing standards. After years of research, identified does not contain toluene and other harmful and high-odor solvents, heavy metal-free aromatic chemical raw materials and a new generation of environmentally friendly products.