Glass, glass, ceramics, and some plating surface silk screen printing ink

Supply Caijing glass, glass, ceramics, and some plating surface silk screen printing ink / transfer ink CC-72 series two-component cold metal / glass ink CC-72 series of glass metallic ink Scope: ordinary glass, tempered glass, ceramics, Part plated surface CC-72 series of glass metallic ink applications: microwave ovens, electronic scales, decorative sliding doors, cabinets and other CC-72 series metal glass ink Features: 1, light 2-component 3, 4 high hiding power, water Good 5, solvent 6, 7 colorful, fragrant green metallic glass plating surface of the ink note: 1, the recommended baking temperature is 120-150 ℃, time of 10min, the baking temperature is too high or too long, ink It may be some degree of yellowing 2, multi-trapping, bottom and middle layers can initially 80 ℃ × 10min table dry, and finally a layer of 150 ℃ × 10min curing to ensure quality 3,25 ℃ under the conditions the curing agent is mixed After the ink can be used for 4 hours, more than this time limit, it will have an impact on the quality of the plating surface of metallic glass ink reservoir conditions: 1, before use and after use, should the ink container is completely sealed and placed in cool and well-ventilated place, Avoid contact with naked flames or heat 2, please at 5 ℃ -25 ℃ condition, avoid bright light, protection from exposure to acid and alkali Shelf life: from the date of manufacture of the products from the shelf life of 12 months, please re-confirm the deadline Usability Tips: results of the test data of the Company under certain experimental conditions tested, not as guaranteed. Please customers in the use of the test in accordance with the actual situation, after confirmation can meet customer requirements for mass production. If the customer is not performed using the consequences caused by the company's products before the test, the Company shall not be responsible for the service center as long-term supply Carpoly ink: PVC light ink CC-11 series of fine printing inks ABS CC-19 Series High cover plastic ink CC-23 series would not lose face PS inks CC-26 series metal glass ink CC-33 series of glass metallic ink CC-34Y series of high-grade PET CC-50 series ink coating surface printing inks CC-59 series of plastic halogen-free ink CC-83 series Garbo four colors of ink phone cover glass lenses Garbo ink CC-72S Series CC-72 glass ink quality assurance: The third-party testing authority, Carpoly ink has passed the EU RoHS, the European EN- 71 PART3,6P, American ASTM-F963-07, EU REACH and a series of testing standards. After years of research, identified does not contain toluene and other harmful and high-odor solvents, heavy metal-free aromatic chemical raw materials and a new generation of environmentally friendly products.