Cycloid hydraulic motors, high speed hydraulic motors

OMM series cycloid motor OMM series cycloid motor OMM series cycloid hydraulic motor ◎ axial flow rotor insert column structure design, high mechanical efficiency ◎ special dynamic seal with a high back pressure tolerance ◎ many flanges, output shaft , port and other installation form ◎ small size, compact structure, light weight ◎ widely used in plastic machinery, agricultural machinery, machine tools and other areas of OMM series cycloid hydraulic motor parameters OMM series cycloid hydraulic motor parameters ◎ intermittent working pressure refers to the maximum allowable pressure inlet continuous operating pressure means the pressure of work. ◎ should not use the motor at maximum speed and maximum pressure. ◎ intermittent speed or intermittent pressure allowed duration: permissible value of up to 10% per minute. ◎ recommended oil: Anti-wear hydraulic oil, viscosity 37-73cst, ??oil cleanliness ISO18 / 13. ◎ maximum operating oil temperature 80 ° C. ◎ special dynamic seal design, the maximum allowable backpressure motor up to 10MPa, but in order to get a good life and overall performance, we recommend the back pressure should not exceed 5MPa, when more than the recommended connection leaking pipes, leaking pipes connected, you should ensure the motor is always filled with oil. Leaking pipeline should be a throttling back pressure to keep 3.5Bar above. Then leaking pipeline in addition to a lower back pressure can be maintained, but also can make worn away pollution generated within the motor, and may have some cooling effect. ◎ motor full load before running-in period should be recommended to the run at 30% or less of the maximum working pressure for 1 hour.