Motor oil used in construction machinery, mining machinery

LMT series cycloid hydraulic motor LM6 cycloid hydraulic motor hydraulic orbital motors physical map structural features LMT LMT series motor is a motor end face of the assignment. Its structural features:? End surface with advanced flow design, low speed smoothly. ? Advanced shaft seal designed to withstand high back pressure. ? Advanced dispensing mechanism design, with automatic wear compensation. ? Double row tapered roller bearings designed to withstand greater radial force. ? A variety of flange, output shaft, such as the installation of connection. The main performance parameters Main Specification LMT hydraulic motor performance parameters Table 1. Maximum operating pressure means the maximum inlet pressure, continuous working pressure is the pressure of work. 2. The motor can not operate at maximum pressure and maximum speed. 3. Working conditions in discontinuous , run time should not exceed 10 percent per minute. The recommended 68 # anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18 / 13. 5. The maximum operating oil temperature 80 ° 6. Before working at full capacity motor, Running at 40% should be the maximum working pressure or less one hour. 7. The motor allows maximum back pressure 10MPa, it is recommended not to exceed 5MPa, should take over leaking pipes.