SCS11H seater automatic float air trap

 Product Description SCS11H seater automatic float air trap Description: Due to the compressed air condensate water waste lubricating oil, easy to valve hole blocked, the domestic many such valves do not cross the border, has always been a long-standing. I have developed a two-seater float traps, use compressed air automatic hydrophobic successfully solve this problem. SCS11H seater automatic float air trap works: The valve with a stainless steel hollow sphere buoyancy of the water to drive the switching system to work. Due to the use of leveraged torque amplification principle and double-seated balance of power principle, the valve drain hole increased sensitivity increase, fully automatic hydrophobic for compressed air. SCS11H seater automatic float air traps Note: 1, when the direction of drain valve installation must be consistent with the direction of the arrow, the valve must be mounted horizontally, the vent valve must be vertical. 2, before the valve is installed the pipeline must be cleaned to remove impurities. The valve inlet filter is provided, the user can periodically clear the net dirt according to their own line, to ensure normal operation of the trap. 3, the manual vent valve must be adjusted to maintain a trace leak, otherwise the body can not afford half of the air discharge, the water level can not rise, the ball can not be increased, the valve can not be opened hydrophobic. 4, the general compressed air system can be used on the 2nd body. Particularly in the oil system should be used on the 3rd body. SCS11H seater automatic float air trap main technical parameters: pressure ≤1.6MPa Temperature ≤250 ℃ Leakage rate ≤0.5% Medium steam, condensate life ≥16000 hour model and connection SCS11H-- pipe thread connection SCS11H seater automatic float air trap shape the structure and connection size: Body No. Applicable path GLH 号 2 DN15 ~ 25 1/2 "~ 1" 190 78 号 3 DN15 ~ 25 1/2 "~ 1"