Supply ER105FEF120, ER116ER110CS45H bell-shaped float steam trap Features and ..

ER105F EF120, ER116 ER110 (CS45H) bell-shaped float steam trap characteristics and performance 1, the amount of condensate occur adaptability. Both intermittent emissions, but also continuous emissions. 2, the internal displacement of the double seat with large machinery and SCCV differential pressure off the system, small and large displacement. 3, the internal parts made of stainless steel and is mounted on the valve cover, maintenance is very convenient. 4, high back pressure 90% 5, reliable :( vapor separator through the U-shaped channel into the lower part of the valve), always in the water seal inside the valve, effectively preventing the leakage of steam. 6, spacious lip of the float anti water hammer. It provided the bucket overflow vent, which can effectively prevent steam locking an air blocking phenomenon. (Non-condensing of hot air can be excluded) 7, can be made in conjunction with the lever mechanical pressure valve. Double-seated differential mechanical and SCCV off mode: SCCV off mode and dual mechanical differential pressure valve installed in the same unit long life. When the condensation of water increases, the bucket loses buoyancy makes mechanical seals generate reverse pressure. Open the main valve to obtain large displacement using steam equipment quickly start to maximize the thermal efficiency of the machine. The main external and connecting dimensions Model Nominal diameter DN Connection pressure range (Mpa) Maximum allowable temperature ℃ Body material material of main parts Dimensions (mm) L H1 H2 W ERl05 (CSl5H-3.7) 20-40 internal thread ZG1 / 2 "-1" 0.01-0.3-0.7 220 WCB SUS (3C rl 3) 200 160 135 - ERl05F (CS45H-3.7) 15-25 32-50 flange 0.01-0.3-0.7 220 WCB SUS (3C rl 3 ) 270 160 135 - ERll01 (C45H-5.12) 15-25 32-50 flange 0.01-0.5-1.2 220 WCB SUS (3C rl3) 310 160 165 131 167 - ERll6 (CS45H-7.16) 15-25 32-50 method Portland 0.01-0.7-1.6 220 WCB SUS (3C rl3) 310 160 165 131 167 - ERl20 (CS45H-8.16) 40-65 flange 0.01-0.8-1.6 220 WCB SUS (3C rl 3) 420 175 214 - ER25 (CS45H -25-40-64) 15-50 flange 0.05-2.5-4.5-6.5 425 WCB SUS (3C rl 3) 380 210 180 345 ER25W (CS65H-25-40-64) 15-50 socket weld 0.05-2.5 -4.5-6.5 425 WCB SUS f3C r_31 380 210 180 345