HGS07 network type flame arrester

Name: Network-type flame arrester Related Products Model: HGS07 network type flame arrester Diameter: DN15-600mm media: Oil Tel: 021-51097581 Yang Chen-Net product description HGS07 flame arrester is suitable for storage flash point below 28 ℃ CPI oil and oil flash point below 28 ℃ B, also used to store the material in a nitrogen tank dome cap, gravel and network type flame arrester principle above, with the pipe. And breathing valve, breathing manhole supporting the use, can also be used alone. HGS07 type mesh flame arrester main parts materials Body filter carbon steel, stainless steel 100 mesh / inch HGS07 type mesh flame arrester the main technical parameters Model HGS07 series flange connection form nominal diameter DN15 ~ DN600 (mm) Medium water, oil, steam, corrosive liquid pressure range of 0.6 ~ 4.0MPa Applicable temperature ≤450 ℃ main material of carbon steel, stainless steel flame arrester HGS07 type network performance qualified, thirteen consecutive test every time the flame arrester. Eligible fire resistance, resistance to fire, one hour without tempering. [Net flame arrester main dimensions] PN DN d LH 2.5MPa 4.0MPa 15 20 130 60 20 25 150 70 25 30 160 80 32 35 180 90 40 45 200 100 50 60 230 115 65 75 290 150 80 90 310 210 100 100,350,235,125,135 400,290,150,160,480 340,200,220,600,410 [Maintenance] 1. In order to ensure the safety arrester performance to the intended use of the flame arrester should be checked periodically, and maintenance. 2. The flame arrester inspected once every six months, check the fire resistant layer core is blocked, deformation, corrosion. 3. Find the blocked fire resistant layer core should be cleaned to ensure that each of the perforations on the core flow, deformation and corrosion for fire resistant layer should be replaced. 4. reinstall fire resistant layer core, should ensure not leak tight joint surface.