Shandong Jining Luxury air pump factory Pump FWQB70-30 wind turbine submersible pumps, mining ..

Shandong Jining Star pump air pump manufacturer specializing in the production and sales FWQB70-30 wind turbine submersible pumps, mining pneumatic sewage pumps, wind turbine pump, wind turbine submersible pump, FWQB50-20 air pump, air pump, BQFIV type air pump, BQF16-15 air pump, BQF16-15 wind pump ,, pneumatic pumps, pneumatic pumps, pneumatic submersible pumps, mining air pump, mine pneumatic pumps, mining pumps, wind pumps, small air pump and other products. Features: 1, low noise, stay within 40 db; 2, less air consumption, high efficiency; 3, small size, light weight, compact, easy to move; 4, long life, less wearing parts, easy maintenance. FWQB70-30 pneumatic submersible pump use and maintenance Caution: 1, prohibited long-term dry run. Because of the pump by friction wheel speed, idling will cause friction and heat, the temperature rises and damage components. 2, non-volatile, throw, prohibit the use of a sledgehammer, sharp hammer pump, pump operation before blasting attention away from the face, smashed against rocks. 3, the diameter Ф25 hose connected to the pump, pay attention to clean joints, avoid inhalation powder residue pump. 4, after assembling the turbine cover maintenance, should pay attention to the nozzle outlet and the pump reverse arc chamber alignment, otherwise reduce efficiency. 5, the submersible pump uses GB491-55 calcium-based grease, run about 300 hours should be open to clean fuel. 6, in normal operation, but no water flow drops or when the spring ring is worn or loose seals must be replaced seals or tighten the spring, or suck the faucet, the water wheel clogged debris, must clean up the faucet water wheels. 7, the body vibration increases when running, mainly bent shaft or bearing wear, shaft straightening or need replacement. 8, when the pump is not in use, it should be painted a little oil on the wind vane to prevent rust. 9, when the pump is required to dismantle, do not arbitrarily replace asbestos pad of paper, such as when damaged, it must match the thickness of the paper pad or asbestos, because the entire space has been strictly tested before leaving the factory adjustment, otherwise it will affect the technical performance and efficiency. Where I plant for the products, to ensure the supply of spare parts.