Imported high-temperature pump inlet pump inlet temperature heat pump heat conducting oil pump inlet

Imported high-temperature pumps | import heat pump | heat conducting oil imports pumps | heat pumps imported - a reliable imported heat pump Product Overview imported high-temperature heat pump is the pump. Heat pump using heat from the cooling system does not require water to cool the body, simplified structure, smaller size, lower operating costs, the performance is very reliable. So get used in various high temperature liquid transport occasions. The oil pump is high temperature resistant high temperature oil pump. High temperature oil pump with self heat radiating system, do not require water for cooling pump body, simple structure, smaller size, cost, performance is very reliable. So the high temperature liquid transfer in various occasions in use. ??? Since the heat pump for conveying high temperature liquid, so the seals and corrosion of bearings, high temperature resistance requirements. Mechanical seals and packing have good thermal adaptability, mechanical seals with carbide material. Bearings are imported from Germany NFS, high mechanical strength. These are necessary to ensure good temperature pump operation. ? Heat pump technology advanced, high-efficiency, long-term stable operation without leakage in the hot state, no additional cooling systems, the use of safe and reliable, in our heat carrier heating system has been widely used, has entered the petroleum, chemical , various industrial fields rubber, plastics, pharmaceuticals, textile, printing and dyeing, roads, food, etc., mainly used for conveying solid particles of the weak decay of the high-temperature liquid, temperature ≤370 ℃, is an ideal hot oil circulating pump . Second, the import of heat pump Features: HTF pump is the unit of digestion and absorption of foreign oil pump based on the development of second-generation product, the basic structure in the form of single-stage single-suction cantilever foot support structure, axial suction pump inlet, outlet It centered vertically upward, and motor mounted on the same base. Heat pump support structure takes the form of double-end ball bearings, front-end lubricating oil, the back-end with grease lubrication, the middle of a lead pipe to always observe the seals and thermal oil recovery. Self heat dissipation structure, change the traditional water cooling structure, the structure is simple, small size, operating cost savings, performance, use and reliable. Third, the import heat pump seal performance: (1) packing seal and mechanical seal combination in the form filler sealed with high temperature resistant filler, good thermal adaptability, and the mechanical seal is made of high mechanical strength, abrasion resistance Good carbide materials, to ensure the sealing performance under high temperature conditions. (2) the use of third-generation PTFE (referred to as PTFE) to do lip seal, the sealing performance produced a leap than rubber-based sealing reliability increased by 25 times, highly corrosion-resistant. ? Fourth, imports of heat pump performance parameters: Model Flow (m3 / h) Head (m) Speed ??(r / min) Power (kW) shaft power Nominal power VHTP26-20-100 4.5 15 2825 0.45 0.75 VHTP50-32-150 8 22 2740 1.0 1.5 VHTP50-32-160 10 25 2840 1.5 2.2 VHTP65-40-160 12.5 25 2880 2.5 3 VHTP50-50-170 12.5 32 2890 3.2 4 VHTP65-50-180 32 32 2900 4.5 5.5 VHTP65-50-170 40 25 2900 4.5 5.5 VHTP80-50-180 40 40 2900 6.7 7.5 VHTP80-50-170 60 20 2930 6.7 7.5 VHTP100-65-190 60 38 2930 9.2 11 VHTP100-65-200 80 40 2930 12.5 15 VHTP100-65-220 58 50 2940 12.5 15 VHTP100-65-230 100 55 2950 19.5 22 VHTP100-65-240 100 70 2950 25.5 30 VHTP100-65-257 100 80 2940 32.5 37 VHTP125-100-190 155 30 2950 20 22 VHTP125-100-220 160 45 2970 25.5 37 VHTP125-80-250 160 60 2970 32.5 45 VHTP125-100-257 200 60 2970 42.8 55 VHTP125-100-260 260 70 2970 64.3 75 VHTP125-100-270 300 70 2970 72.3 90 VHTP125-100-270 220 85 2970 68 90 VHTP150-125-270 340 76 2970 89.5 110 VHTP150-125-270 400 78 2970 106 13 Please consult your authorized dealer performance 2 - Shenzhen Ou Valve Import & Export Trading Co., Ltd. Contact: Mr. Zhang Tel: 0755 -29,077,977 0755-33137572 Mobile: 13428666198 http://www.fm5899.com inlet valve: http: //www.588fm.com http://www.588fm.com/sitemap.htm