Times demand - sales of high thermal mine pneumatic submersible pumps

Times demand - sales of high thermal mine pneumatic submersible pumps wind turbine submersible pumps, pneumatic submersible pumps, mine pneumatic submersible pumps, pneumatic submersible pump manufacturer pneumatic submersible pumps are widely used in mines roadway development, shaft Shaft Construction, discharge water underground caverns and mining face, turbid water, sand, mud, water and various slag cinder water. The pump is equipped with advanced silencer, also has a small size, light weight, high lift; compact, easy to move; durable and easy to repair. Model Flow (m3 / h) Head (m) using the pressure (MPa) Air consumption (m3 / min) inlet pipe diameter (mm) outlet pipe diameter (mm) Dimensions L × W × H (mm) Weight (kg) mine pneumatic pump BQF-Ⅱ 25 50 0.4-0.7 4-4.5 25 38 320 × 275 × 370 25 Model Flow (m3 / h) Head (m) using the pressure (MPa) Air consumption (m3 / min) into the air duct diameter (mm) outlet pipe diameter (mm) Dimensions L × W × H (mm) Weight (kg) BQF-Ⅳ 18 15 0.4-0.5 1.5 25 38 230 × 200 × 350 10 wind-driven submersible pump with a series of advanced technology, it has small size, light weight, novel structure, easy to operate, easy to install, repair, and mobile and so on. Drainage work place for mining exploration, wells tunnel or shaft Shaft Construction varying environmental conditions such as to ensure operating within the rated speed range. Is a high-efficiency, high-lift mines dug wells, construction of drainage wells ideal tool. It features a wind turbine pump, variable speed. As long as the throttle valve opening control program, which controls the gas flow rate, it can achieve variable speed. 2, reliable, durable, independent of temperature and vibration effects, install, operate and simple. 3, with silencer, noise, easy maintenance, small consumables. It features a wind-driven submersible pump, variable speed. As long as the throttle valve opening control program, which controls the gas flow rate, it can achieve variable speed. 2, reliable, durable, independent of temperature and vibration effects, install, operate and simple. 3, with silencer, noise, easy maintenance, small consumables. 4, has a high starting torque and the ability to work almost instantly to full speed. 5, adaptable. Adapted to discharge water, turbid water (mud, silt, cinder water), and light weight. Care must be taken when using the maintenance pump following a wind-driven submersible pump uses the pump before commissioning time to be on the ground load, wind is 0.6mpa, the pump work ten minutes, check whether the normal operation. 2, an inner diameter of? 50mm hose and drain connection, avoiding waste rock powder residue into the pump. 3, non-load operation. 4, after assembling the turbine cover maintenance, should pay attention to a pump reverse nozzle outlet chamber aligned arc 5, 300 hours running around should open the cleaning refueling, care must push oiled when not in use. 6, in normal operation, but no water when the flow drops or shall dismantling the repair or replacement parts wind turbine submersible pump, works with pneumatic submersible pumps, pneumatic submersible pumps manufacturers, wind turbine pump