Binzhou Lu in the company of choice for lifting equipment lifting equipment installation

150mm, flat top reserve must be marked with the tag line, wiring for the phase line into the switch, the zero line into the lamp, the zero line into the cap, the face of the socket to the left and right relative to the ground zero; switch socket must be secured to the correct position, tighten affixed to the wall. The same room, the box on the same level; switches, sockets conventional height (in the old floor computing), a horizontal line must be a unified standard installation. . With two or more cranes lifted the same weight, the rope should be kept perpendicular to each crane lifting operation shall be synchronized; each crane to withstand load shall not exceed their rated lifting capacity. Not meet the above requirements, should be reduced to 80% of the rated lifting capacity; reduce the rated lifting chief engineer also be able to use the actual situation. When lifting, chief engineer should be present guidance. There are primary, cranes, main and auxiliary hook deputy two lifting mechanism should not start at the same time, the design allows the simultaneous use of special cranes excluded.