Electronic equipment handling equipment handling _ _ Jining in Shandong Lu lifting of choice

Rain and snow weather conditions mainly affect handling equipment works: In general, heavy rain and snowfall in outdoors equipment handling difficult work, because most of the production facilities do not have the waterproof ability, rain or snow or even wet weather can cause the device to rust ; if it is sophisticated equipment, it may directly lead to equipment damage. However, if the last resort, has extensive experience handling Suzhou removal companies can carry in rain, snow weather. Windy days: according to state regulations, six more than the windy weather should stop some of the lifting operation, because strong winds causing severe swing lifting objects, can easily result in lifting accident. Mist or dust storms: the southern cities in recent years frequent fog weather, and northern cities are dust storms occur each year, such events affect the driver's line of sight, easily lead to accidents. In addition, including typhoons, cold, heat and other weather could have an impact on the work of handling equipment. Bad weather condition of the equipment Handling Precautions: snow days Note: In Suzhou lifting removal opinion, rain and snow removal equipment should be the focus of attention of the three items. First, pay attention to moisture transport equipment, the best of equipment Plastic packaging, to prevent water. Second, pay attention slip. Rain and snow could cause friction between the reduction in contact, such as the road surface to hook contact surfaces, etc., can be laid non-slip mats or sprinkle sand, increasing friction. Stormy days Note: strong winds may blow lifting objects, so it is best to add one traction rope, maintaining stability when lifting. Haze days Note: Due to the fog day driver vision is affected, it is necessary to strengthen communication and information command staff drivers, in particular to ensure that no one was under the lifting, hoisting was run line is not blocked. Presentation equipment borrowed the truck first, ordinary internal combustion forklifts generally use diesel, petrol, liquefied petroleum gas or natural gas engine as power, load capacity of 1.2 to 8.0 tons, the operating channel width is generally 3.5 to 5.0 m, taking into account the emissions and noise the problem, usually outdoors, workshop or other exhaust emissions and noise do not require special place because of convenient refueling, it can achieve long continuous operation, and competent (such as rain) to work in harsh environments. The first Second, the heavy-duty truck diesel engine as power, load capacity from 10.0 to 52.0 tons, generally used for heavier cargo terminals, steel and other industries outdoor operations. Third, container truck diesel engine as power, load capacity of 8.0 to 45.0 tons generally divided into empty container forklift, heavy container forklift and Reachstacker. applies to container handling, such as a container yard or port terminal operations. Fourth, Sideloader diesel engine as power, load capacity of 3.0 to 6.0 t In the case of not turning, with the ability to take the goods directly from the side of the fork, and therefore mainly used fork to take a long bar goods, such as wood, steel, etc. welding wires and charged away from the rope, live line distance should be maintained at more than 2 meters, or a protective frame, welding wire and wire rope cross should be separated, is strictly prohibited contact. Before lifting lifting handling construction, should contact to understand the weather conditions and the local meteorological department, generally not in the rain and snow, outdoor or night work, as must be carried out, with non-slip, adequate lighting measures, and the approval of the leadership, it is prohibited in Wind is greater than six hoisting large equipment must not be greater than five in the wind when lifting, construction workers must wear helmets, such as winter construction, ear protection should be put down, in order to facilitate unimpeded hearing. Throughout the construction process, to do clean up the site and remove obstacles to facilitate the operation. For use in the construction process when the tying rigging structures must undergo checking, affordable, safe to use after approval. While padded layer of protection to ensure the structures and rigging will not wear, but may not be used for these structures.