Heze in Shandong company of choice for equipment installation diagram installation of monitoring equipment

Lifting mechanism brakes suddenly failed at the time of hanging objects, drivers should take timely measures to deal with the following: the car should be a point or anti-vehicle operation immediately after (1) found in the work, see if you can, and then stopped at different weights case processing. (2) If you still can not brake, signal and should take the following measures: 1) immediately with large car in the immediate vicinity of the select safe space, with the fastest speed down the hanging objects, slow down when approaching the ground, do not use free-fall approach; 2) If the ground is not safe down when no space, in the case of suspended matter can be brought, repeatedly raised, in order to prolong the stay of suspended matter in the air time. Great start, the car will choose the security space object down; 3) should be if you need to lift heavy weights pulled by block, this block can not be quickly pulled. Prevent overcurrent relay and power outages. If not lift, you have to quickly select safe space to put down hanging objects. In some large equipment handling process, the crane hoisting equipment handling process is inevitable and handling equipment for lifting problem, we have the following requirements: First, the indigenous rolling method for construction of mobile handling equipment, roll bar thickness to be consistent, annual care should be longer than the row width 50cm, non-roll bar filled with gloves. handling car trim slope not greater than 20 °, raceway erection to be smooth, solid, joints staggered, scrolling speed is not too fast, if necessary When to use leavened rope. Second, during the installation process, if found should take timely measures to deal with and then continue lifting. 3, with derrick hoisting large tower equipment, the multiple hoist combined operation, it must require each hoist winch speed is substantially the same, to ensure that each lifting point on the tower by force generally tends to be uniform to avoid discontinuity tower uniform deformation. Fourth, using the rotary method or toppled Hoisting tower tank, bottom-mounted tower wrist hinge must have the ability to resist lifting horizontal thrust generated by the process, and about the process of leavened rope lifting tower must be secure when the tower height rotation in place to slowly fall into the foundation, to avoid accidents and deformation V. In the frame body or the building when installing the device, its strength and stability to achieve the requirements of the installation conditions. After installation positioning requirements according to drawings or welded connections are tight to meet the design requirements of strength and having a solid After sex, to decoupling, or to be temporarily fixed.