Outside the sand, new river, under the lotus, the East Village, on the China wholesale manufacturers luminous, south of the river, lotus

Under the sand outside New Creek, lotus, East Village, luminous wholesale manufacturers 13066121552 QQ1979239460 luminous silk screen printing factory wholesale luminous yellow-green luminous effect on how they compare on China, south of the river, lotus? A: The luminous tile on hard board under the sun, light, natural light absorbance 5-15 minutes to saturation, then get together with the hard board you can see the glow in the dark. Bright, luminous glow in the dark can be 1-20 hours, LED light-emitting or absorbing life can be repeated more than 20 years, yellow-green, blue-green, sky blue luminous single high brightness, long time, the most widely used. 1. luminous ink, paint, paint, glue, Epoxy (hereinafter collectively referred to as ink) 2. Chunliang use special luminous ink and water into oil luminous luminous, luminous oil is recommended for use in oil-based ink must now adjust when used with water-based ink now, put on a long white lumps, losing luminous effect. Water luminous water, oil ink GM, but slightly more expensive than oil luminous, it is generally only used in an aqueous medium; 3. Ink choice: A, luminous transparent varnish applied in the best effect, colored ink is also luminous powder can be added, but the color of the night, the lower the brightness, deep color inks to increase the ratio of luminous powder added to enhance the brightness. B, use different printing materials corresponding ink, such as metal on the selection of metal special ink, ABS plastic material on the use of ABS special ink, so as to ensure the luminous ink stick too firmly; 4. Add the ratio: 1 kg Ink: luminous 3 million grams to 1 kilogram, in this context, the more luminous the added amount of the brighter, the added amount is too small are scattered unevenly, resulting in some of the products do not emit light or when there is a black spot light; 5. Mixed Methods: ready The luminous placed in a small container, add the same amount of ink, stirring with a wooden products even (remember not to stir with a metal object, otherwise it will be black), so luminous fully wet, remove the air luminous powder particle surface, so as not to affect the their dispersion. For toning or add additives can while stirring, must be careful not to have lumps phenomenon. After mixing well, then pour in proportion to the prepared ink Stir Serve luminous ink. (Anti-settling agent can be added to prevent the luminous sink to the bottom) (ink is too thick add water that day may be appropriate, such as thinner help disperse) 6. silk screen options: general purpose with 80-150 mesh screen tuned to luminous ink, There are special requirements can also choose finer screen, but be sure to pay attention to the thickness and luminous match to ensure that India can continue luminous; if using luminous ink spray gun should pay attention to the size of the mouth, so as not to clog the gun luminous ; 6, screen printing (spraying); luminous ink best screen on a white base, reflecting the effect of improving the use of the underlying pattern or logo luminous brightness and luminous afterglow time. If the substrate is non-white or light-colored, white or light-colored need to get in silkscreen ink on top of the substrate, the thickness of 0.1 ~ 0.5mm; keep products after lay white surface without grease, no dust, then stir luminous ink even start spraying (silk) luminous ink thickness of about 0.2 to 0.5 mm, spraying (silk screen) after 40-60 minutes let it dry naturally or dried Serve luminous products