Rivet Machine Shops | riveting machines | speed front

1, the top should be firm, two collaborative help to be in unison. 2, the use of wind when the top of the top after a good hand to leave to travel outside of the wind. 3, the first stop riveting, after stopping the top. Dingweimaowan can not loosen the top. 1 nail to burn through, throwing nails knock preceded it, remove the oxide and then throw. 2, there is no obstacle, and then nailed a person is represented to the nail, can not throw nails. 3, throw nail rivet machine maintenance, to be spotted target can not be too low, too high, people can not nail the front butt thrown. 4, throwing nails shall not exceed ten meters distance. 1, if necessary rivets, nails should be ready then prepared to a predetermined signal indicating nail. 2, then nail should be armed with an iron bucket rivet machine manufacturers, arms stretched out, with the direction of the flow acess to nail. 3, the failure of nails required to return the furnace, the first contact a good person and burned nail Zaiwang Hui throw. 4, red hot red nail may not littering. 5, from bottom to top to wear nail rivet machine supplier, after a good first top loose poker. When using pneumatic twist Daojiao holes are not allowed to wear gloves, not allowed to hand-holding the reamer. Punch must install metal handle, confirmed nobody out direction, go down to the cast nail. Rivet Machine Shops | riveting machines | speed provided by Feng Feng Houjie speed machinery factory. DONGGUAN speed feng Machinery Plant (www.dgsufeng.com) strong, credible, in Dongguan, Guangdong electronics, electrical products manufacturing equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead you hand speed front and into the brilliant, for a better future!