Pneumatic rivet machine | speed front (certified) | Riveting machines

1. Check the hydraulic power cord and plug are in good condition. 2, various oil line quick connector to work only after reliable connection. 3, when a rivet machine manufacturers, hands steadied Riveter rivet machine image, legs to stand apart. 4, at the bottom of the body before caulking or riveting Yang job, should wear protective glasses and head need to avoid rear rivet gun. 5, non-operator put your finger tips Riveter. 6, after work, clean up sludge riveter, stains, disk power cable and tubing; clean up the site rivet head. Output wavelength: 635nm 650nm 660nm Output power: 635nm 0.5 ~ 30mw 650nm 0.5 ~ 200mw 660nm 0.5 ~ 300mw Operating voltage: 2.7 ~ 24V DC Working current: ≤450mA Beam divergence: 0.1 ~ 1.5mrad light opening angle: 10 o ~ 135o light Diameter: ≤0.5mm @ 0.5m; ≤1.0mm @ 3.0m; ≤1.5mm @ 6.0m; straightness: ≤1.0mm @ 6.0m optical lenses: Optical coated glass or plastic lens size: Φ8 × 25mm; Φ9 × 35mm ; Φ11 × 37mm; Φ12 × 40mm; Φ16 × 55mm; Φ16 × 65mm; Φ16 × 80mm; Φ22 × 85mm; Φ26 × 110mm (can be customized) Working temperature: -10 ~ 75 ℃ Storage Temperature: -40 ~ 85 ℃ Laser class : Ⅲb pneumatic rivet machine | speed front (certified) | riveting machines offered by feng Houjie speed machinery factory. DONGGUAN speed feng Machinery Plant (www.dgsufeng.com) is a leader in Dongguan, electronics, electrical products manufacturing equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customers needs. Feng leadership in speed with the staff warmly welcome all inquiries negotiations to create a better future speed front.