LED Strip Light Silicone

Lights coated silica [Products] ??? This series is from the condensation silicone A and B two-component composition, the two components are colorless and transparent liquid. This series of products A, B after mixing with good liquidity, good post-curing product with good elasticity and excellent resistance to high temperature performance, but also has excellent electrical properties, resistance to ozone and atmospheric aging. A, Group B parts by weight ratio of 1: 1, it will cure to be applied to electricity and electrical and electronic components potting elastomer. [Product main technical indicators and application] ??? Model AM-2013122 AM-2013122 before curing Appearance A colorless transparent colorless 8000 3500 B 3000 3000 B mixing ratio of transparent colorless transparent colorless transparent Viscosity (Mpa.s) A 1 : 1 1: 1 1: 1 mixed operation time (min 25 ℃) 60min 60min Curing time 25 ℃ 8 ~ 12h 8 ~ 12h after curing Hardness (Shore A) 20 ± 5 20 ± 5 Elongation at break (%) ≥ 100 ≥100 Tear strength (KN / m) ≥2.5 ≥2.5 Tensile strength (Mpa) ≥3.0 ≥3.0 applications LED soft light potting, encapsulating the partial indicator LED light bar can be adjusted according to the specific needs of customers . [Operation] 1, mixed: two components in a weight ratio of 1: 1 is completely mixed, and the weighing accuracy. Mixing either manually or using the equipment to be fully mixing evenly, to avoid incomplete cure; 2, degassing: the air sensitive applications, required vacuum after stirring; 3, the product will begin gradually after mixing cured, its viscosity will gradually rise, and will release some of the heat. Try a mixture of glue used up in the time available; 4, curing process, please keep the environment clean and avoid impurities or dust falling into the uncured glue surface. [Note] 1, when mixed plastic materials, is recommended before using metal or plastic utensils, rubber or wood utensils before use must be confirmed not cause curing inhibition; 2, all with silicone have contact member, do not touch the rubber-like material ; 3, use gloves made of polyethylene, do not use rubber gloves materials. 【Packing】 1, the product points A, B two-component packaging. 2, this product is plastic bottles, 1KG / group (A / 500G; B / 500G). [Storage and transportation] a cool, dry place for storage, the storage period (at 25 ℃) 1 years; 2, these products are non-dangerous goods, according to general chemical transport; 3, colloids A, group B components are shall be sealed, especially B component to minimize contact with air; 4, water, and organic acids may react with the rubber compound curing agent, never in contact with the use; 5, do not have poured glue then pour the liquid back to the original packaging to avoid contamination of the unused glue. [Safety & Protection] The product is non-dangerous goods, but not imported and the eye. Minimize contact with the skin. Pleasant to the eye and entrance should be cleaned immediately with water, and timely medical treatment. Hand contact with the skin, please rinse with soap and plenty of water. When disposing of this product, follow the relevant laws and regulations.