Silicone mold Silicon AstraZeneca hand model complex for plastic mold silicone mold silicone raw materials turn

Features PTV silicone rubber mold is a high performance molding material, the mold copy simulation strong, vulcanized silicone rubber and other materials, non-stick, high temperature and aging performance is good, excellent performance, but also has high tear strength, elongation and other advantages. Use to select the appropriate container, add 1/4 of vessel volume base, in proportion (weight) was added a curing agent, stir, at temperatures greater than 0.09MPa vacuum discharge bulbs 5-10 minutes, quickly rubber material into the mold cavity. Storage and transport 1. The silicone mold should be stored at room temperature, dry and seal the container, not in contact with water to prevent deterioration. 2. The product shelf life is six months 3. This product is iron packaging, specifications: 25KG / barrel [Note] 1. heavy use before you small amount of trial skills to master its use, to avoid unnecessary loss. 2. If the mold species belonging to ceramics, cement and other silicon-containing material, to be sprayed with a release agent or paint to release mode. 3. stirred vessel used need to clean up. The residue stirred vessel wall due to uneven, try not poured into the mold, so as not to cause local not curing. 4. Note that the ratio between silica and curing agents can be used balance or electronic scale. 5. When the fluid viscosity is too high, can be appropriate to add silicone oil (5%) to adjust, increase its liquidity. But the hardness could be reduced. 6. To adjust the curing time of the silicone rubber mold, adjust the ratio of the curing water. You can also contact me, configure the appropriate curing water for you. 7. In the process of using If in doubt, please feel free to contact me FAQ silicone mold applications encountered: