Plastic bucket specification concrete tank complex set of equipment

Production of various sizes of plastic tanks (plastic bucket), pe tanks / plastic bucket price, corrosion towers, chemical tank factory - Cixi Hongsheng Plastic Container Co., Ltd. Tel: 15088460100 Business QQ: 188159529 Address: Cixi Yu Temple Road East side number 1260 Welcome! We look forward to discuss cooperation with you! pe plastic tanks using sophisticated rotational molding process as a whole, to ensure that the product no welds, non-toxic, tasteless, acid and alkali resistance, impact resistance, thicker product temperature 80 ℃, low temperature -40 ℃, aging. Company home page: http: //www.nbhsrq.com/ pe plastic tanks Features: Features A: acid, alkali; feature two: the resistance to temperatures up to 70-80 degrees Celsius, resistance to freezing of not less than 30 Celsius degrees. Three characteristics: atmospheric products, can not be applied to more than atmospheric pressure (1 atmospheric pressure) or more of the positive or negative; For mixing or when the proportion of acid concentration of 1.2 or more, preferably install reinforcement kits and thick barrel wall thickness is appropriate. This feature is particularly pe plastic tanks containing volume in more than 10000L barrel of special needs attention. (Sulfuric acid, nitric acid concentration of more than 28% always use premium products and best to install a reinforcing sleeve) feature four: pe plastic tanks of rotational one piece of the products, with no welding, seamless, non-toxic, odorless, easy to clean , flexible handling of the advantages. Note:. Pe plastic tank output interface or flange of the container factory installed come loose during transport or even damage, the receipt and be sure to check before installation is intact. (2) The connection between the container or external piping, requires the use of a flexible or U-shaped connecting and stents hold on the pipe and interface must not by force, pressure and pipe to prevent the weight of the container containing the liquid when the damage to the interface and the container body. (3) .pe plastic water tank in the rear interface and pipeline installation, you must test the water, and the connection check whether the interface barrel and piping for leaks. (4) The interface and pipe part should be checked monthly, we found abnormal situation should be timely maintenance. (5) the reinforcement of our sets of 250mm, 1.5mm cold-rolled steel sheet; to be installed at the pe plastic tanks not installed liquid tightness to fall off in the barrel is appropriate; in the long-distance transport and handling reinforcing process will damage the paint sets, so after installation to be repainted to increase service life, and to butter on the fastening screw and nut, so as not to affect the strength of rust.