Exports of wooden crates

It is one of the oldest wooden crates packaging containers, packaging timber after the amount of paper in the packaging containers, while wooden crates off than the amount of developing countries is much greater, therefore, wooden packaging containers packaging container occupies a very important position. A wide range of wooden crates, while in the actual logistics trade, the wooden crates used in three ways: 1, ordinary wooden crates ordinary wooden quality of its contents is limited to 200 kg or less. It consists of side, end, bottom and lid. Mounted on the side of the first end surface, and then mounted on the side of the base and lid from the end face. 2, sliding wooden slide are medium-sized wooden boxes, their contents quality limited 200-1500㎏ outer dimensions of length, width, height, and packaging is limited to 7m, width, and height at 1.5m or less, mainly for machinery products It can also be used for small pieces of cargo-loaded. Ordinary wooden mainly based on face and side to carry, and slippery wooden based mainly wooden base, it is more than an ordinary wooden box can withstand greater load. Therefore suitable for medium-sized product packaging wooden boxes. Sliding wooden (B-type box). Sliding wooden constituted from the base, side, end and top cover. First side and face mounted on the base, then the cover mounted on the side and end surfaces together. 3, wooden frame wooden frame is large wooden box, its contents outside the maximum weight and maximum dimensions are determined according to the usual conditions of transport. In general, foreign minister in the 12m wooden frame below the outer width at 3.5m or less 3.5m or less in outside the high, its contents weighing less than 500-20000kg. This is mainly used for packaging large wooden mechanical products, can also be used small pieces of container cargo. Wooden frame is composed of a base, side, end and top cover. They are differences in the structure: frame wooden box board for the upright plate: outer frame wooden box board, skeleton are all arranged in the box; wooden frame assembly when the first two side mounted to the base and two side Finally, the cap binding; both in the base load basis, but the slippery wooden frame wooden than the end surface and the side more than the framework, it is precisely because these frames, the frame than the slippery wooden wooden box can withstand much greater load.