Axial Fan

T40 type axial fan, T40-type fan used as a general factories, warehouses, offices, residential heating ventilation cooling purposes or to strengthen, if housing is removed, you can make free the fan. It can also be a longer interval exhaust duct installed in series, to increase the pressure in the pipeline. By fans and non-corrosive gases should be significant dust, its temperature must not exceed 45 ° C. T40 type axial fan, this series of products according to the impeller diameter is divided into ten kinds of different machine number, in order of priority for the №2.5,3, 3.5,4,5,6,7,8,9,10 like. Each blade can be mounted gauge 15 °, 20 °, 25 °, 30 °, 35 ° angle of five. T40 type axial fan, is in the original 30K4 type (also known as 03-11 type) fan on the transformation design. T40-type fan due to the modification of the original 30K4 type fan airfoil, and using a new type of cylindrical hub structure, the efficiency of the fan consequent increased from 69% to 84%. But also enhance the strength of the blade root, and to avoid the emergence of blade root fracture phenomena. The products are used in impeller directly mounted on the motor shaft directly linked structure. In the impeller peripheral speed of not more than 60 m / s Condition equipped with three speed: 2900,1450,960 rev / min. Seen in the direction of the impeller inlet face counterclockwise rotation. Since the impeller diameter, blade angles, different speed spindle speed, so the wind, air pressure and power consumption has also come to be different. Pressure from the 3.2-48.3 mm water column (mmwg), the wind increased from 564 ~ 48,200 m3 / h (m / 3h) The fan mainly by the impeller, chassis, set the wind is composed of three parts. (1) The impeller portion: composed by the blades and hub, blades with a thin steel plates. And selected according to the mounting angle of the welding to the hub. (2) the housing department: the hairdryer, base and support plates and other components, are made of a thin steel plate and profiles, hairdryer as there is a gap between the straight cylindrical impeller. (3) Set the wind section: Set wind is an arc streamlined, reducing airflow inlets losses, made of a thin steel plate. Company Name: Henan Hong Blower Co., Ltd. Tel: 0394-8533988 Mobile: 13663945500 QQ: 758899266 E-mail: hongjifengji@163.com Website: www.hjfj.com.cn www.hongjifengji.com Chuanhui Qu Zhoukou City, Henan Province, North Central 6 Taiqing Road Industrial Park