CDZ11 axial fan described Heng Hing conditioned Figure CDZ11 axial fans

BT35 Series explosion-proof axial fan is a new fan T30-11 on the basis of improved design, the main advantage is that the structure is more reasonable, the performance has greatly improved. Impeller group, the main duct section, set the wind is composed of three parts. T35-11-type axial fan is a simple structure, low noise axial fan. Depending on the size of the impeller diameter into No.2.8, No.3.15, No.3.55, No.4, No.4.5, No.5, No.5.6, No.6.3, No.7.1, No.8, No.9 , No.10, No.11.2 total of thirteen kinds of machine numbers, each machine has a number of 0 to 4 leaves. Leaves can be loaded into 15 degrees, 20 degrees, 30 degrees, 35 degrees in five different angles. Thus, since the size of each gauge blade mounting angle of the spindle rotating speed is different, fan pressure, air flow and the power consumed is not the same as having a performance described in the performance table. Transmission: selection of each pole motor directly connected to the impeller housing is made of a cylindrical body, the direction of rotation is clockwise (viewed from the motor direction) explosion-proof axial fan suitable transport flammable and non-corrosive gases , the ambient temperature must not exceed 60 ℃, widely used in general factories, warehouses, offices, residential heating ventilation or strong heat, it may also have a longer interval series exhaust pipe installation, in order to increase pressure in the pipeline, unloading freedom to do the motor fan. The company mainly produces: Wall fans, exhaust fans, heaters, wind chassis, Francis fan, positive pressure blower, square wall axial fans, axial fans, FRP axial fan.