Reducing joint 68 zinc alloy fittings 45 degree bend joint instrument instrument

Fittings have a solid connection, high voltage capability, temperature, sealing, and repetition is good, easy installation and maintenance, safety and reliability. Generally used in gas or liquid delivery tube intermediate connector, easy to use and fast, straight sleeve type connectors at both ends have clamps, the end portion of the tube wear need to be connected, and then connect the nuts after the clamping, card Nested no self-styled good, self-sealing joints in the case of one-way valve will disconnect the connection ends of the tube without exposing the gas or liquid, good airtight effect. If leaks Check 1, 2 pipe is not inserted in the end, the nuts are not tightened 3, the outer surface of the steel pipe is not scratched or round. 4, pipe too hard. Fittings is a balanced and safe seal small diameter pipe fittings. A fine tube fitting can be done: 1. withstand up to pipe burst pressure without leakage. 2. Can be used for vacuum and high-pressure liquid systems. 3. You can work to ensure that the seal at low temperature. 4. Under the tube maximum rated temperature lasting seal. 5. Repeat disassembly and ensure the seal. Fittings are repeatedly reloading, but to ensure that no damage and clean the parts. 1, the pipe inserted into the connector body until the inner cone sleeve joints snapping, hand-tighten the nut. 2, tighten the nut with a wrench until the tightening torque increases rapidly, then tighten 1/4 to 1/2 turn to. [Joint], φ6-φ8 diameter fittings, in producing all kinds of joint Sino-Instrumentation instrument instruments available. Zhenjiang Instrument Instrument Valve Co., Ltd. (www.zjdqyb.com) is located in Zhenjiang City, Jiangsu Zhenjiang oil mill Zone, Contact: Huang Yongxian