High-quality plastic screws plastic screws Xin Li

Operating methods and precautions: ⑴ first threaded interface degreasing or decontamination, dry, making it dry, clean and free of oil. ⑵-demand gap between the workpiece size, choose fit rubber hypoxia (viscosity). ⑶ to hypoxia plastic coating on the public front teeth (depending on the size of the increase or decrease in amount of plastic tubing), when combined male and female dental tool can be locked. After about 5 minutes ⑷ locking initial fixed period do not make glue loose parts, otherwise it will destroy rubber hypoxia effect. ⑸ be fully cured rubber hypoxia more than 24 hours, it is best to use a combination of good and medium-sized workpiece 24 hours before use, so that better results. ⑹ To make fully cured rubber hypoxia quickly, apply a high temperature above 80 ℃ on the bonding site. ⑺ If teeth or parts of large gap tube adhesion is not tight, please add appropriate amount of iron oxide powder coating after mixing evenly. ⑻ complete workpiece after fastening the clincher, must use high temperature steam to the bonding part of uniformly heating or open flame to bake evenly glued directly to the site only after loose glue to soften. ⑼ This product is not exposed to direct sunlight, should be placed in a cool, well-ventilated place. After use ⑽ be stamped to prevent contamination of other materials of metal, dust, etc., thus contributing to the storage period is shortened. ⑾ If this product contaminated skin with soap appropriate. ⑿ this product Packing: 1kg 250g 50g are available. Plastic screws, anaerobic adhesives because of their unique anaerobic curing characteristics, can be used in locking, sealing, retaining, bonding, sealing and so on. Anaerobic machinery industry has become an indispensable tool liquid. In the aerospace, defense, automotive, machinery, electronics, electrical and other industries it has a very wide range of applications. Plastic screws lock locking metal screw that is shock and vibration effect is prone to loose or offline, traditional mechanical locking methods are not ideal, but cheap and effective chemical locking methods. If the screws were coated with anaerobic assembly cure to tough plastic film in the thread gap, so that the locking screw is not loosened.