Changde washing machine belt Yueda network chain factory air bath washing machine belt

Cleaning belt replacement even need this essential part of the washing machine to replace the belt on the floor cleaning technique is to network with the main drive sprocket Removing the end, the operator for the dull, dull to the left of the layer When drying belt master, bolts active on the lower end of the shaft cover, out of the main, drive shaft parts, inspect the door open, remove the chain box will bake net and put a new drying nets, each carefully cut off 6-8 rhizophore network roll with stainless steel wire mesh with the carrier network to bake rolls around fasten, then placed above the opposite step debugging. It followed with a drive shaft in two from the seat when really a tune mediation bake net chain tension, the chain not too tight or too loose, and about two chain tension must be kept the same. Washing machine belt production process of decryption washing machine belt production process: the equipment are wrapping machine embossing machine welding machine composed of three into the purchase of ready-made material thickness has generally cleaner belt.... thickness around the wire and washing machine belt axis is not the same now to the finale Measure debit washing machine according to belt width can be wrapped around the wire mesh belt washing machine. This can be simultaneously produced. Both Hou out by the Workers assembled. sides spot welding. Finished on the well.