Stainless steel mesh belt manufacturer Tangshan stainless steel mesh belt Yueda chain network Low quality

Stainless steel mesh belt can transport the material in a certain line, from the initial feed point to the discharge point between the final form of a material transport process. It can deliver a granular material, it can also be transported into pieces items. In addition to the pure material handling, but also with the requirements of various industrial enterprises in the production process of the process of cooperating to form a rhythmic flow transport line. Stainless steel mesh belt widely used in glass industry, stainless steel mesh belt mesh belt annealing furnace is widely used in glass industry annealing furnace operations mesh belt, mesh belt furnace DECORATED. Material: 1cr13 belt, 201 mesh, 304 mesh, 316 mesh belt. Each delivery process chain mesh, mesh belt. Food processing industry, dehydrated vegetables, frozen food before processing IQF machine belt, chain network. In addition surface phenomenon and no decarburization within. This is due to the thin chromium oxide layer of stainless steel surfaces in the preheating zone is oxidized state, into the hot zone into a reductive after, so the surface oxide is reduced, but into the cooling zone, though, like the atmosphere, but the temperature is lowered, changed back to oxidation, so that belt again oxidation, this oxidation, reduction reincarnation will result in damage to the material. Traditional 314 stainless steel mesh belt, for example, often the first to make quenching general preheated, namely at 870 ℃ in air activities to manipulate the switch to the normal premise N2-3% H2 28 hours, then hold temperature for 2 hours Then within 14 hours gradually warming up to 1120 ℃ and holding temperature for 8 hours and then began sintered parts. But about eight weeks after the tape begins to break.