Used dryer Used dryer drum scraper

Device type operation device type operation can generally be divided idling test, load test, the accuracy of the test three. (1) Idle test: in order to assess the accuracy of the retention device is installed, the device stability, and transmission, manipulation, control, lubricating, hydraulic and other systems are normal, sensitive and reliable performance and other relevant parameters and running in no Beethoven under the state. Empty load operation a certain time is an indispensable step run-in must be carried out before the new equipment put into use. Load (2) test equipment: Test equipment in a number of standard load conditions tested, tested in some cases. Whether the load experiment should check the bearing temperature specifications, assessment of the hydraulic system, transmission, steering, control, security and other devices work to a factory standard, normal, safe and reliable. Commissioning under different load conditions, but also new equipment necessary for the work carried Running, running how the quality of trials, for equipment life great impact. Accuracy test (3) Equipment: General should be in accordance with the instructions after the load test, it is necessary to check the device itself geometric accuracy, but also to check the accuracy of the work (processed product). Most of the test equipment in use after two months. 4) job to run after the first disconnect total circuit and power source device, and then make the following equipment inspection, record: (1) do a good job running after the equipment cleaning, lubricating, tightening, replace or troubleshooting parts and debug, make the best use of the device into the state; (2) prepare and geometric precision finishing equipment, precision test records inspection records and other functions; (3) the commissioning of finishing equipment (including troubleshooting) record; (4) can not be adjusted for the problem, analyze the reasons, summarized in terms of equipment design, manufacture, transport, storage and installation. (5) to assess the operation of the equipment conclusion treatment advice, go through handover procedures, and indicate participate commissioning personnel and dates. Acceptance and transfer using 5) installation project.