Used vacuum drying oven price - Product Price

Vacuum drying oven maintenance and repair processes such as vacuum oven drying equipment is one of the market is very mature product now, but also as one of most enterprises choosing the ideal drying equipment. Although it does not have an operator for the careful maintenance work, but the basic maintenance is essential, allowing longer life of equipment, to improve the quality of production also play a role. Maintenance should pay attention to the following points: 1, after the production is completed, if not using a vacuum drying oven, you should pay attention to the various components of the clean, especially the oven door seal clean, with anti-aging phenomenon . Vacuum drying oven door closed tight, but do not speak of the door locking device is screwed too tightly to prevent deformation, and cut off power and water. 2, in the case of long-term unused, to be cleaned on a regular basis the box, do not use an acid, high strength liquid alkaline cleaning, then clean with water after cleaning is completed, it should pay attention to the water dry. 3, rotary vane vacuum pump vacuum pump oil should be changed regularly, once or twice a month, when to be a long-term need for a vacuum pump oil after use exhausted at the end, before the next use to inject new vacuum pump oil. 4, water ring vacuum pumps to be replaced once a circulating water every day, to be after a long time when not in use at the end of the pump to pump water to the exhausted body, in winter temperatures below minus every day to vacuum pump body Water to be exhausted before the next use should pay attention to whether the vacuum pump is rust, rust if the pump motor cover should be removed, with the tool to twist the motor shaft. 5. The device in normal use, failure, should immediately reacted to the manufacturers should not disassemble, so as to avoid serious damage. 6, the need to replace outdated components used, such as vacuum table corruption, need immediate replacement of the vacuum table, seals and aging due to long years, manufacturers should be purchased, each valve after long use can cause the valve seals tetrafluoroethylene wear and tear, so that the vacuum can not be able to get a reasonable value, should be immediately replaced with a new air valve.