Sale used chemical equipment grinder.

1, the first out of the box carefully examined whether the equipment damaged in transit, then the high machine and auxiliary electrical control devices in place, then turn the tube main and auxiliary roads shall be made with each pipe outlet flange assembly Seals painting "anchor 609" liquid sealant, to ensure sealing the pipe, while each single and pipe are connected together with a grounding conductor and grounded to prevent static spark caused by dust explosion. 2, before every single trial operation, if there is metal objects inside the machine must be inspected and, if that is ruled out. Bolt is solid, the tightness of the belt, the shield of reliability and so on. 3, according to a steady start in the following order each electric motor, close the damper start grinder -> Dust -> grading equipment -> screw feeder -> Open throttle -> closed airlock. 4, run empty for five minutes, the operator must carefully observe the control cabinet various instruments, to be no-load current is stable before feeding. After feeding, not allowed to exceed the rated current of 32.6A, otherwise the amount should be reduced 迸 to ensure the normal operation of electric discharge can be timed work. 5, according to the following order stopping screw feeder -> run five minutes later to stop the smash with the host, ESP, classifier -> closed airlock. 6, CVT handle manipulation classifier, classifier wheel speed can be changed, but to adjust the product's excellent. Such as requiring products fine grain size can improve speed, reduce speed and vice versa, larger size particles